Is this the right manual for my bike?

Hi i have 1983 kz750 f-1 shaft iv been using this manual for my bike everything look mostly the same but been told other mesurements and jet sizes. is this the right book for me? picture attached

Does it tell in the first few pages what models it covers ?

yea P and N i think not F how was i supposed to know when i got it. its the same parts and gaskets but im just not sure on mesurements iv got my floats at 21mm if im mesureing right. someone just told me 16mm book says 21. somenone els said 26 i think i really just need the accurate float measerments and probalby the right book

If the back cover of the manual is legible, it may list the models covered.

Good Fortune!

No eBay APP ID and/or Cert ID defined in Kunena configurationTake a look at the back cover of this manual on eBay. Notice it lists the F1 as one of the models it covers. If your manual cover the F1 the back cover should show it.

Ed

ok thats the manual i have. so how come on the inside it olny cover N model and P

Look toward the back of the manual. Often there's a section titled "Supplement" that covers other specific models. Ed

DBICK666 wrote: ok thats the manual i have. so how come on the inside it olny cover N model and P

Look on the back cover & verify that your bike is included on the model application chart.
If so, there should be a supplement for the 1983 model year & a supplement for the 1984 model year.
Find the 1983 model year supplement information which will be towards the rear part of the manual.
The 1982 N1 & P1 info is covered in the main body of the manual & some of that info applies to your bike, but some doesn't. Using the supplement, you'll have to figure out what info is different for the F1.