The best way to rust proof your bike. idiot?

start the bike up with the oil cap off..

Actually lets make this a post about all the knuckle head things u have done..

also i have sat there all night trying to figure out the new old bike i just picked up would let the rear tire spin while it was in gear.. finally i realized the bike didnt have a chain!


**opps is it possible to delete or move this is the proper section** not sure how it ended up in ENGINE..

as you can tell im always goofing something up

get drunk and mad because your help didnt show up and proceed to spend an hour trying to pull motor out wrong side of frame even though youve pulled motors out the right side of frame too many times to count in the past!
now who would do something stupid like that? :laugh:

Don't park it out in the rain.

Don't park it out in the rain? Hell...that's how my father used to wash his Harley...when it got cleaned. Most times he would just roll it out into a rain and let it sit. Once in awhile he would get out there with soap and a bucket and use some suds on it and then let the rain rinse it off. Presto! Sorta clean Harley! Simple!!! :dry:

I installed a front brake pad backwards... then wondered why it kept squeeking.

---

plummen, your killing me with the pulling motor out the wrong side of the bike. been there.

in his defense i hear told the guy did have 6-7 margaritas in him at the time ! :whistle: :woohoo:

wireman wrote: in his defense i hear told the guy did have 6-7 margaritas in him at the time ! :whistle: :woohoo:

Strawberry?

I can just hear it now. "Where's that goddamn prybar? This f'n motor is comin' out if I have to pull it out with the tractor!"

yeah i vaguely remember lots of explissive words being tossed around at the time,of course they were strawberry like theres any other kind! :woohoo:

Built an "A" frame out of aluminum tubing for the top of truck camper (cover with tarp for snow protection). Had to try the new MIG, so laid the bottom rectangle section out on the garage floor, then proceeded to weld it together around one of the support posts!!! :laugh: :laugh:

BTW, my bike is rustproofed also...

leave a old plug wrench in the tube part of the rim/tire put the bike back together...polish everything real nice..check.re-check the tire pressure...(dont want to ride with the wrong psi do we) then go for a nice ride and race a sports car onto the packed freeway in rush hour....what did i win???