- Posts: 223
- Thank you received: 0
End of my ELR Clone project - Selling all of it
- jcote75
- Topic Author
- Offline
- User
Less
More
15 May 2008 21:31 #213926
by jcote75
End of my ELR Clone project - Selling all of it was created by jcote75
Hate to do this but I will have to keep only one bike. Family obligation... So will be keeping the KZ1100R so this mean stopping my KZ1000R clone project.
This mean I got a complete GPZ1100B2 Kz1000J motor and other parts.
Since I had a lot of help here, will give the first shot here. Here is what going on Ebay this week end:
-Freshly redone KZ1000J head. All cap bolt are OK and paint satin black. Cam included. The valve job was done by the dealer. Like new.
- Kz1000J Cylinder oversize 0.50. Was clean and "deglaze" (not sur of this word)
- OEM overzize 0.50 piston and ring. This is used but all within spec.
- KZ1000J Cranckase
- KZ1000J transmission
(This bike was running before dismantle. There was a burn valve so this is the reason for the valve job.
- ELR seat in very good condition
- GPZ Fairing and screen and all mounting bracket. Very good condition. Bracket been sandblast and Powdercoated.
- KZ1000J Gauge (Speedo/RPM/Gas) in very good condition. Say 9/10
- GPZ1100 Fork tube. Those are like new
- ELR Handlebar (Been sandblast and powdercoated)
- GPZ handle bar switch (left and right) in very very good shape.
- KZ1000J handle bar switch (left and right) in fairly good condition
- 2 set of very nice tank emblem
- 1 pair of side cover emblem. Those are brand new OEM KZ1000R1 with the blue R. Still in original package!
- kzJ millage counter
- GPZ Headlight fork holder (Been sandblast and powdercoated)
- GPZ B2 Front and Rear wheel. Note that the rear wheel is wider than a KZJ wheel. It it the same size as a true ERL.
-GPZ Grab bar (Been sandblast and powdercoated)
- KZ grab bar - Need to be repaint
- KZ triple tree with new paint and bearing
- GPZ Triple tree in good condition
- GPZ1100B2 Head - One plug hole will need work. Thread is starting to strip so wont hold the correct torque
- GPZ1000B2 Cylinder, Piston, rings
- GPZB2 transmission and crankcase
- GPZ B2 Gauge
- GPZ B2 Black Motor covers (stator, clucthc, ect..)In good condition
- GPZ Rear ajustable shock. In very good condition
- KZJ Airbox
These will be list this week end. Send me a message if someone interested in something.
There are many other parts available so ask for any.
Joce
This mean I got a complete GPZ1100B2 Kz1000J motor and other parts.
Since I had a lot of help here, will give the first shot here. Here is what going on Ebay this week end:
-Freshly redone KZ1000J head. All cap bolt are OK and paint satin black. Cam included. The valve job was done by the dealer. Like new.
- Kz1000J Cylinder oversize 0.50. Was clean and "deglaze" (not sur of this word)
- OEM overzize 0.50 piston and ring. This is used but all within spec.
- KZ1000J Cranckase
- KZ1000J transmission
(This bike was running before dismantle. There was a burn valve so this is the reason for the valve job.
- ELR seat in very good condition
- GPZ Fairing and screen and all mounting bracket. Very good condition. Bracket been sandblast and Powdercoated.
- KZ1000J Gauge (Speedo/RPM/Gas) in very good condition. Say 9/10
- GPZ1100 Fork tube. Those are like new
- ELR Handlebar (Been sandblast and powdercoated)
- GPZ handle bar switch (left and right) in very very good shape.
- KZ1000J handle bar switch (left and right) in fairly good condition
- 2 set of very nice tank emblem
- 1 pair of side cover emblem. Those are brand new OEM KZ1000R1 with the blue R. Still in original package!
- kzJ millage counter
- GPZ Headlight fork holder (Been sandblast and powdercoated)
- GPZ B2 Front and Rear wheel. Note that the rear wheel is wider than a KZJ wheel. It it the same size as a true ERL.
-GPZ Grab bar (Been sandblast and powdercoated)
- KZ grab bar - Need to be repaint
- KZ triple tree with new paint and bearing
- GPZ Triple tree in good condition
- GPZ1100B2 Head - One plug hole will need work. Thread is starting to strip so wont hold the correct torque
- GPZ1000B2 Cylinder, Piston, rings
- GPZB2 transmission and crankcase
- GPZ B2 Gauge
- GPZ B2 Black Motor covers (stator, clucthc, ect..)In good condition
- GPZ Rear ajustable shock. In very good condition
- KZJ Airbox
These will be list this week end. Send me a message if someone interested in something.
There are many other parts available so ask for any.
Joce
Please Log in or Create an account to join the conversation.
- Mcdroid
- Offline
- User
- Gone Kwackers
Less
More
- Posts: 6629
- Thank you received: 316
16 May 2008 01:20 #213951
by Mcdroid
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Replied by Mcdroid on topic End of my ELR Clone project - Selling all of it
Joce...I'm sorry to hear this...but, you are keeping the coolest of the ELR's:)
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- jcote75
- Topic Author
- Offline
- User
Less
More
- Posts: 223
- Thank you received: 0
20 May 2008 18:24 #214831
by jcote75
Replied by jcote75 on topic End of my ELR Clone project - Selling all of it
List a bunch of parts on ebay. Will end next Sunday.
Search for Eddie Lawson Replica and check others items for the full list.
There a few interesting one,
Search for Eddie Lawson Replica and check others items for the full list.
There a few interesting one,
Please Log in or Create an account to join the conversation.