- Posts: 642
- Thank you received: 15
Hey- should I make enough for everyone?
- CruisingRam
- Topic Author
- Offline
- User
Less
More
23 May 2007 17:12 #142901
by CruisingRam
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Hey- should I make enough for everyone? was created by CruisingRam
I am cuting out some seamless pipe, not too thick of wall, probably around 1/16th-1/8th. Doesn't need to be too thick anyway
but I am cutting out frame bracing per the yoshi kit for my Z1.
Depending on how much the tubing costs- I think I can offer them in the $25-$75 buck range, + shipping, which will go flat rate- 8.95$
You think there is enough interest here for me to go ahead make some for everyone that wants one?
NOt an offer yet- just seeing if there is enough interest to make a couple extra of these?
See pic for what I am talking about!
Post edited by: CruisingRam, at: 2007/05/23 20:14
but I am cutting out frame bracing per the yoshi kit for my Z1.
Depending on how much the tubing costs- I think I can offer them in the $25-$75 buck range, + shipping, which will go flat rate- 8.95$
You think there is enough interest here for me to go ahead make some for everyone that wants one?
NOt an offer yet- just seeing if there is enough interest to make a couple extra of these?
See pic for what I am talking about!
Post edited by: CruisingRam, at: 2007/05/23 20:14
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Attachments:
Please Log in or Create an account to join the conversation.
- CruisingRam
- Topic Author
- Offline
- User
Less
More
- Posts: 642
- Thank you received: 15
23 May 2007 17:16 #142904
by CruisingRam
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Replied by CruisingRam on topic Hey- should I make enough for everyone?
Anudder-= by the way- I will be using usual mild steel for easy welding- NOT chrome moly- so no heat treat neccesary!
Post edited by: CruisingRam, at: 2007/05/23 20:16
Post edited by: CruisingRam, at: 2007/05/23 20:16
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Attachments:
Please Log in or Create an account to join the conversation.
- 77KZ650
- Offline
- User
Less
More
- Posts: 1397
- Thank you received: 7
23 May 2007 18:07 #142916
by 77KZ650
07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH
Replied by 77KZ650 on topic Hey- should I make enough for everyone?
looks like a great offer for guys with little time to fab stuff.
07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH
Please Log in or Create an account to join the conversation.
- MDawnz1
- Offline
- User
Less
More
- Posts: 328
- Thank you received: 27
23 May 2007 20:17 #142966
by MDawnz1
1974 Z1a, still 903
Replied by MDawnz1 on topic Hey- should I make enough for everyone?
If you have the time ,and want to do it ,why not copy the Kosman kit ?
1974 Z1a, still 903
Please Log in or Create an account to join the conversation.
- wireman
- Visitor
23 May 2007 20:23 #142971
by wireman
Replied by wireman on topic Hey- should I make enough for everyone?
Attachments:
Please Log in or Create an account to join the conversation.
- CruisingRam
- Topic Author
- Offline
- User
Less
More
- Posts: 642
- Thank you received: 15
23 May 2007 21:09 #142983
by CruisingRam
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Replied by CruisingRam on topic Hey- should I make enough for everyone?
Ya, I like your gusseting there in the "V" of the frame behind hte motor mount- can't make out most of the rest, except up at the spine, and it looks about the same as the Yosh.
I doubt it will be identicle to the Yosh kit anyway- unless you want some kind of period correct road racer.
I have been down on the foot pegs a couple times, scraping the rubber off them- if I go with a rear-set- I will scrape exhaust and the case at the stator,
I DEFINATELY want better rebound and damping- I am sorry- but with 10w in the forks, they still suck. I can feel the frame flex a bit, and the 130s I have on back bite pretty good, same with the 110s on front.
I am building another frame, or rather, I have drawn one up and will make it next winter- for my streetfighter project. I will use USD forks, maybe even Ohlins, on that one- depending how much do-re-mi that I have in my pocket! I have not been able to talk a customer into anything but chopper-soft-tail-hybird frames so far- and I really, really want to do a trellis frame- I have a good 3 bikes worth of Z stuff now, so it will only be the high end components that I need for suspension- like a Ohlin for the back.
But this bike- well, it needs a fork brace, it needs better damping and rebound, it needs a wider rear tire- I am building the swing arm from the same OD tubing as the stocker- only out of Chrome moly- and .125 at that- EXTREMELY strong- no flexy swing arm for me!
There will be no way for anyone but the most sophisticated Z1 person to spot that it is not a stock swing arm.
Post edited by: CruisingRam, at: 2007/05/24 00:11
I doubt it will be identicle to the Yosh kit anyway- unless you want some kind of period correct road racer.
I have been down on the foot pegs a couple times, scraping the rubber off them- if I go with a rear-set- I will scrape exhaust and the case at the stator,
I DEFINATELY want better rebound and damping- I am sorry- but with 10w in the forks, they still suck. I can feel the frame flex a bit, and the 130s I have on back bite pretty good, same with the 110s on front.
I am building another frame, or rather, I have drawn one up and will make it next winter- for my streetfighter project. I will use USD forks, maybe even Ohlins, on that one- depending how much do-re-mi that I have in my pocket! I have not been able to talk a customer into anything but chopper-soft-tail-hybird frames so far- and I really, really want to do a trellis frame- I have a good 3 bikes worth of Z stuff now, so it will only be the high end components that I need for suspension- like a Ohlin for the back.
But this bike- well, it needs a fork brace, it needs better damping and rebound, it needs a wider rear tire- I am building the swing arm from the same OD tubing as the stocker- only out of Chrome moly- and .125 at that- EXTREMELY strong- no flexy swing arm for me!
There will be no way for anyone but the most sophisticated Z1 person to spot that it is not a stock swing arm.
Post edited by: CruisingRam, at: 2007/05/24 00:11
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Please Log in or Create an account to join the conversation.
- donthekawguy
- Offline
- User
Less
More
- Posts: 1913
- Thank you received: 8
23 May 2007 21:52 #142990
by donthekawguy
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
Replied by donthekawguy on topic Hey- should I make enough for everyone?
You can sign me up for a couple of them there sets.
Rathdrum Idaho
1971 Kawasaki g3ss
1972 Yamaha R5 350
1965 Suzuki Hillbilly
1964 Yamaha 125
Please Log in or Create an account to join the conversation.
- CruisingRam
- Topic Author
- Offline
- User
Less
More
- Posts: 642
- Thank you received: 15
24 May 2007 10:31 #143110
by CruisingRam
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Replied by CruisingRam on topic Hey- should I make enough for everyone?
Cool, I will just pop out four or five of each thing I make- and offer them up on the board when I do it for myself. It won't be until late fall to mid winter though- right now, I ride like a banshee!
I a still going to be saving up me duckets to get me that 1000p set up,
I think I have scored some rear shocks, some good ones, I will know soon enough- I am looking for the Zrex ones!
I a still going to be saving up me duckets to get me that 1000p set up,
I think I have scored some rear shocks, some good ones, I will know soon enough- I am looking for the Zrex ones!
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Please Log in or Create an account to join the conversation.
- zmaniscalco
- Offline
- User
Less
More
- Posts: 119
- Thank you received: 0
24 May 2007 10:42 #143113
by zmaniscalco
78 kZ1000
79 KZ1000 Ltd turbo
Replied by zmaniscalco on topic Hey- should I make enough for everyone?
I think Kossman made 25 more sets for his shelf to sell
78 kZ1000
79 KZ1000 Ltd turbo
Please Log in or Create an account to join the conversation.
- CruisingRam
- Topic Author
- Offline
- User
Less
More
- Posts: 642
- Thank you received: 15
24 May 2007 22:08 #143309
by CruisingRam
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Replied by CruisingRam on topic Hey- should I make enough for everyone?
I will have to check them out and see if it is even worth my time, if they got em for the right price, and they are not chrome moly!
I can't seem to find kossman's site- you gotta link?
Last I heard- they were out of stock!
Post edited by: CruisingRam, at: 2007/05/25 01:13
I can't seem to find kossman's site- you gotta link?
Last I heard- they were out of stock!
Post edited by: CruisingRam, at: 2007/05/25 01:13
1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.
Please Log in or Create an account to join the conversation.
- kawsakiman
- Offline
- User
Less
More
- Posts: 1254
- Thank you received: 6
25 May 2007 12:40 #143446
by kawsakiman
someday i will be able to afford my kz habit.
Replied by kawsakiman on topic Hey- should I make enough for everyone?
looks good to me.
no custom work just set them in and weld.
put me down for one also.
no custom work just set them in and weld.
put me down for one also.
someday i will be able to afford my kz habit.
Please Log in or Create an account to join the conversation.
- chetriply
- Offline
- User
Less
More
- Posts: 51
- Thank you received: 0
25 May 2007 13:28 #143464
by chetriply
Replied by chetriply on topic Hey- should I make enough for everyone?
Sign me up for a set! Great deal if you ask me.
Please Log in or Create an account to join the conversation.