Welcome, Guest

Forum

Non-Technical Forums

Page:
1
2
3

TOPIC:

My '82 440 LTD 01 Oct 2017 15:50 #772127

Scirocco Offline Premium Member Never change a running system Posts: 3926 Thank you received: 1899	I have tin plated my complete fuel tank from the out side surface, plus fill the emblem depressions with tin (after removing the emblem holders) and some very little dents before i sealed the inner tank surface with POR15. I have used a little bigger (550 Watts) soldering iron. My 1975 Z 1 B 900 Project www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode Attachments:
	Please Log in or Create an account to join the conversation. Last edit: by Scirocco.

My '82 440 LTD 01 Oct 2017 15:59 #772130

vwrabbit Topic Author Offline User Posts: 57 Thank you received: 11	Did the tin hold up? 1982 KZ440 former LTD 1975 CB125S 2006 VT600 VLX
	Please Log in or Create an account to join the conversation.

My '82 440 LTD 01 Oct 2017 16:01 #772131

vwrabbit Topic Author Offline User Posts: 57 Thank you received: 11	Getting closer to done. Just need to get the tires mounted on the spare wheels and swap them over. 1982 KZ440 former LTD 1975 CB125S 2006 VT600 VLX Attachments:
	Please Log in or Create an account to join the conversation. Last edit: by vwrabbit.

My '82 440 LTD 01 Oct 2017 16:03 #772133

vwrabbit Topic Author Offline User Posts: 57 Thank you received: 11	Seat cover is cut out. Hoping to sew it up this week. 1982 KZ440 former LTD 1975 CB125S 2006 VT600 VLX
	Please Log in or Create an account to join the conversation.

My '82 440 LTD 04 Oct 2017 11:42 #772343

vwrabbit Topic Author Offline User Posts: 57 Thank you received: 11	Looks like the larger hole that I repaired still has a tiny leak. Going to get some POR15 to seal the tank from the inside. Two steps forward, one step back. 1982 KZ440 former LTD 1975 CB125S 2006 VT600 VLX
	Please Log in or Create an account to join the conversation.

My '82 440 LTD 07 Oct 2017 11:35 #772467

vwrabbit Topic Author Offline User Posts: 57 Thank you received: 11	Found the pinhole that I missed. Got the seat cover done. Repainting the parts of the tank that got messed up. 1982 KZ440 former LTD 1975 CB125S 2006 VT600 VLX Attachments:
	Please Log in or Create an account to join the conversation. Last edit: by vwrabbit.

My '82 440 LTD 15 Oct 2017 15:39 #773003

vwrabbit Topic Author Offline User Posts: 57 Thank you received: 11	Got tires mounted and swapped. Shimmed the cush drive since it was loose. 1982 KZ440 former LTD 1975 CB125S 2006 VT600 VLX Attachments:
	Please Log in or Create an account to join the conversation. Last edit: by vwrabbit.

My '82 440 LTD 15 Oct 2017 15:47 #773006

ajsfirehawk Offline Sustaining Member Posts: 510 Thank you received: 89	Lots of progress. Have you had her out yet? 79 KZ650 SR 80 KZ1000 Z1 Classic 83 KZ1100 LTD Z900RS 23 Mach 1
	Please Log in or Create an account to join the conversation.

My '82 440 LTD 15 Oct 2017 17:31 #773013

vwrabbit Topic Author Offline User Posts: 57 Thank you received: 11	Quick spin around the block. It sputters when it gets warm and under load. Need to check timing and carbs. 1982 KZ440 former LTD 1975 CB125S 2006 VT600 VLX
	Please Log in or Create an account to join the conversation.

My '82 440 LTD 15 Oct 2017 18:32 #773022

JR Offline Sustaining Member Posts: 2911 Thank you received: 429	Nice job. Especislly on the seat and rear end. Hope you get the sputters sorted out 1980 kz750E1, Delkevic exhaust
	Please Log in or Create an account to join the conversation.

My '82 440 LTD 24 Oct 2017 12:56 #773653

vwrabbit Topic Author Offline User Posts: 57 Thank you received: 11	Thanks! Hoping to get some tuning done in the next few weeks. 1982 KZ440 former LTD 1975 CB125S 2006 VT600 VLX
	Please Log in or Create an account to join the conversation.

My '82 440 LTD 15 Nov 2017 20:17 #774664

KiZee Offline User Posts: 7 Thank you received: 0	how's the build going?
	Please Log in or Create an account to join the conversation.

Page:
1
2
3

Forum

Non-Technical Forums

Powered by Kunena Forum

Half Evil Customs