Getting back at it
- 78KZkid
- Topic Author
- Offline
- User
- Posts: 59
- Thanks: 7
Getting back at it
11 Jan 2016 16:36 - 11 Jan 2016 16:41
So I took a few years off and now I'm finally getting back to this project. I started putting 03 gsxr forks and swingarm on this bike but I wanted more, so I looked around for a wrecked bike and 2 says ago I picked up an 06 gsxr 750 for 600$. I tore it apart and kept what I needed. Everything is mocked up at the moment but things are looking pretty good.
1978 kz650
Attachments:
Last edit: 11 Jan 2016 16:41 by 78KZkid.
Please Log in or Create an account to join the conversation.
- rstnick
- Offline
- User
- Posts: 4416
- Thanks: 384
Re: Getting back at it
12 Jan 2016 16:16
Is she a 650?
Will you keep the red on the swingarm and wheels?
Wheels may be OK, but the red swingarm jumps out too much.
Will you keep the red on the swingarm and wheels?
Wheels may be OK, but the red swingarm jumps out too much.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project
Please Log in or Create an account to join the conversation.
- zukdave
- Offline
- User
- Posts: 1685
- Thanks: 229
Re: Getting back at it
12 Jan 2016 17:20rstnick wrote: Is she a 650?
If it is it's got less 650 then mine and that be damn hard to do
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- 78KZkid
- Topic Author
- Offline
- User
- Posts: 59
- Thanks: 7
Re: Getting back at it
13 Jan 2016 08:59
Yes she's a 650... well what's left of it.
And I'm not sure on paint yet, but the red is gunna go
And I'm not sure on paint yet, but the red is gunna go
1978 kz650
Please Log in or Create an account to join the conversation.