- Posts: 8726
- Thank you received: 235
tri's kz1000j project thread.....&updates
- trianglelaguna
- Topic Author
- Offline
- User
- New and improved - extra strength
i still need the following items and am going like a banshee bidding on stuff...first i wanna list the extra 1981 kawasaki 1000/gpz11oo compatable items left over after sorting...if folks "NEED" any of this stuff i would be happy to help out...i would also trade any of my extras collum...for my still needed stuff....here goes....
"EXTRA ITEMS" for 1981-82 kawasaki 1000(gpz1100 fits a bit too)....;
A}..shorty chrome fender...ltd 1000..csr 1000
B]..perfect condition kz1000st fender..chrome..no dings or blemish...perfect..
C]..34 mm cv carbs nice condition...
D}...kz900 carbs stock...need cleaning ...but sprayed in wd-40 and stored for 10 yrs...nice shape...
E]...buck horn ltd 1000 stock bars...should shine up nice
F]...stock kz900 bars need refinish or just run with faded look
G}...ltd 900 rear 16 mag swingarm and the works..axle,caliper,stay rod..ect...all complete...matching 19 mag "just the mag" stripped down..both in low miles shape....
I NEED THESE ITEMS STILL TO COMPLETE AND TRY AND START MY 1000J::
a}stator coil and bolts for j model 1000
b]starter motor and bolts j model 1000
c]starter cover and two bolts and gskt..."starter not stator"
d]complete harness with no extras...just the snake...
e] 630x 96 link chain..any type used is cool too for now....
i am bidding away but wanted to put out to the community what i've extra of and what i need and keep it in the family...i will also pay fair prices and shipping...and really appreciate you guys looking at my post.....
i will use this post to follow the bikes progress and not parts shop from here on....please p.m if need any of that stuff or have any of my needs list...peace bros...
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- PLUMMEN
- Offline
- User
- Posts: 8139
- Thank you received: 104
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- trianglelaguna
- Topic Author
- Offline
- User
- New and improved - extra strength
- Posts: 8726
- Thank you received: 235
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- Old Man Rock
- Offline
- User
- Posts: 6224
- Thank you received: 225
....while patton and omr are at the submarine nationals
Beats you two at Cork-Screw mountain..... :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- kano
- Offline
- User
- Not Another Bloody Limey!
let me know if anything else comes up ok i have to make some room in my garage lol.
PLUMMEN wrote:
submarine nationals! :laugh:
i dont see the attraction?
still you know what they say about submarine's?
Please Log in or Create an account to join the conversation.
- trianglelaguna
- Topic Author
- Offline
- User
- New and improved - extra strength
- Posts: 8726
- Thank you received: 235
below may show any clues...the j1000 had painted legs on the forks??? the fender that was on it can be seen in this older pic...any clues....thanks craig
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
- Offline
- User
- Posts: 3255
- Thank you received: 103
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- trianglelaguna
- Topic Author
- Offline
- User
- New and improved - extra strength
- Posts: 8726
- Thank you received: 235
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- PLUMMEN
- Offline
- User
- Posts: 8139
- Thank you received: 104
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
- Offline
- User
- Posts: 3255
- Thank you received: 103
I hope there are no people on this site shorter than Melvis!
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- Patton
- Offline
- KZr Legend
- Posts: 18640
- Thank you received: 2098
i'll post a picture...but i bought a kz1000 j standard gpz/elr/j1000 type squared painted fender...i wanted one and saw an e-bay in glossy black to match my bike...it comes and is tits beautiful......so i wanna support the front while i'm outta town so no one tips it off the blocks-centerstand...i mount my polished forks and front rim and the glossy black j fender does match the tires rake -angle-slope..whatever...i flip flopped it front back ... still no go.....checked the frame to see if it was a ltdj1000 and a rke difference...nope...it IS a j1standard81 thankfuly....forks do NOT have the leading axle....go figure had to go check a job ...later...pics this week......arghhhhh
below may show any clues...the j1000 had painted legs on the forks??? the fender that was on it can be seen in this older pic...any clues....thanks craig
Am not quite comprehending the front fender fitment issue.
Would it make a difference to install the fender before installing the wheel?
Do the fender mounting holes align with the fork holes?
Is the new fender too wide to fit between the forks?
Is the pictured frame and front end (with the chrome LTD fender) from a J model?
Does the pictured chrome LTD front fender fit where the new fender doesn't fit?
Besides the squared vs oval shape, what is the difference between the new fender and chrome fender mounting area when held side by side?
Am probably misinterpreting something in the narrative, but forthcoming pics of new fender with existing forks should help.
Good Luck!
1973 Z1
KZ900 LTD
Please Log in or Create an account to join the conversation.
- trianglelaguna
- Topic Author
- Offline
- User
- New and improved - extra strength
- Posts: 8726
- Thank you received: 235
trianglelaguna wrote:
i'll post a picture...but i bought a kz1000 j standard gpz/elr/j1000 type squared painted fender...i wanted one and saw an e-bay in glossy black to match my bike...it comes and is tits beautiful......so i wanna support the front while i'm outta town so no one tips it off the blocks-centerstand...i mount my polished forks and front rim and the glossy black j fender does match the tires rake -angle-slope..whatever...i flip flopped it front back ... still no go.....checked the frame to see if it was a ltdj1000 and a rke difference...nope...it IS a j1standard81 thankfuly....forks do NOT have the leading axle....go figure had to go check a job ...later...pics this week......arghhhhh
below may show any clues...the j1000 had painted legs on the forks??? the fender that was on it can be seen in this older pic...any clues....thanks craig
Am not quite comprehending the front fender fitment issue.
Would it make a difference to install the fender before installing the wheel?
Do the fender mounting holes align with the fork holes?
Is the new fender too wide to fit between the forks?
Is the pictured frame and front end (with the chrome LTD fender) from a J model?
Does the pictured chrome LTD front fender fit where the new fender doesn't fit?
Besides the squared vs oval shape, what is the difference between the new fender and chrome fender mounting area when held side by side?
Am probably misinterpreting something in the narrative, but forthcoming pics of new fender with existing forks should help.
Good Luck!
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.