Steell's project(s) Pics
- steell
- Topic Author
- Offline
- User
First one (some of you may recognize this one)
GPzInfested's (my Nephew) 78 KZ650B
And his 79 KZ650SR with the 83 GPz750 motor.
My 80 KZ750E (just put the replacement motor in today).
My 79 KZ750B4 with 82 motor, hope to have it done today.
My twin 1980 KZ750G twins (not even started on them yet)
Can't see very much because they are still buried
And my parts rack, holding less than 25% of my spare parts :woohoo:
That rack is 10' long by 5' high
And a completed project that is now up for sale
Post edited by: steell, at: 2007/05/27 17:50
KD9JUR
Please Log in or Create an account to join the conversation.
- rstnick
- Offline
- User
- Posts: 4378
- Thank you received: 372
I recognize the first pic, but can't remember the specifics. What front and rear ends?
I like the solo seat too. I want to try something like that.
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
Please Log in or Create an account to join the conversation.
- reborn650
- Offline
- User
Ya scooped me on sbjones' tricked out 650. Well, I was thinkin' about snagging it but I am glad it found a good home.
Say good riddance to that little loader and focus on the bikes. Used one of those (Bobcats?) last year for a backyard project. Ended up parking it and using two wheelbarrows to haul the ready-mix up the hill:(
So are you gonna stuff the 1000J into sbjones' old ride?
Cheers-Colin Firth-Ontario Canada
-1977 Kz650 Custom bought new by brother. Now with 810 kit, GPz750 cams, intake valves, Mikuni 29 smoothbores, velocity stacks, Dyna Igntion, MAC pipe and other goodies.
-1982 Ferrari 308 GTSi Red/Tan
-Toyota FJ Cruiser - 6 speed tank
-2010 Mazda CX-7 Turbo (my bride's)
-1998 Jeep TJ Wrangler 4.0...
Please Log in or Create an account to join the conversation.
- kawtoy
- Offline
- User
- Posts: 806
- Thank you received: 6
Harley Davidson- Turning gas into noise without the harmful affects of horsepower for over 100 years.
Please Log in or Create an account to join the conversation.
- steell
- Topic Author
- Offline
- User
I have already told my Nephew that he can't ride the KZ650 with the J motor in it until I ride it and verify it's reasonably safe, and he is already figuring out the frame reinforcement issues.
That BobCat will do the job, but the seatbelt is a requirement, otherwise it's likely to pitch you out on your nose. The big ones are a lot easier to operate, but I hauled this one home in the bed of my 1/2 ton pickup, like to see someone else try that with say, a Bobcat 863 or 873
I think I'm going to ask $3000 for the BobCat, figure it ought to sell pretty fast at that price.
After I am done with it of course (couple more weeks maybe)
By the way fired up my 750 twin and the Nephew's KZ650/GPz750 tonight. The KZ650 has what I believe to be a Kerker with no baffle on it, painful on my ears, got a real "crack" to the exhaust note. It probably won't be as bad when it's outside. Had ignition problems we had to sort out, ended up installing a KZ750 ignition on it.
Post edited by: steell, at: 2007/05/27 23:57
KD9JUR
Please Log in or Create an account to join the conversation.
- Mark Wing
- Offline
- User
- Posts: 1697
- Thank you received: 22
Mark
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Please Log in or Create an account to join the conversation.
- steell
- Topic Author
- Offline
- User
Cool projects.
I recognize the first pic, but can't remember the specifics. What front and rear ends?
I like the solo seat too. I want to try something like that.
I had to go to the ad in the Classifeds to be able to answer :blush:
1)2001 gsxr complete front end
2)2004 gsxr rear end
3)gsxr rear sets
4)sv 650 head light and fairing
KD9JUR
Please Log in or Create an account to join the conversation.
- OneShoe50
- Offline
- User
- 10-4? 10-4!
- Posts: 56
- Thank you received: 0
BTW super sweet projects.
77 KZ1000A1 - Under going a psuedo ELR overhaul
79 KE175 (gone)
81 KZ550A2 (gone)
81 KZ750E (gone)
Sure it looks OK now, but wait until I really make it pretty, with some chrome and paint and some new tires and grips and the wiring. Don't forget the gearing, and the LED's and, and, and....
Please Log in or Create an account to join the conversation.
- steell
- Topic Author
- Offline
- User
When I grow up I want a garage full of cool stuff like you Steell! Any chance you have some spare stuff you want to unload? Say like a set of mag wheels?
BTW super sweet projects.
I have a set of NOS Morris Mags that will fit the 1000, but I'd want a bunch for them
KD9JUR
Please Log in or Create an account to join the conversation.
- KZQ
- Offline
- Administrator
- Walking Behind the Corn May Not Be All That!
- Posts: 4829
- Thank you received: 1394
www.KZ1300.com
Riders:
1968 BSA 441 Shooting Star, 1970 BSA 650 Lightning, 1974 W3, 1976 KZ900, 1979 KZ750 Twin, 1979 KZ750 Twin Trike, 1981 KZ1300, 1982 KZ1100 Spectre, 2000 Valkyrie, 2009 Yamaha Roadliner S. 1983 GL 1100
Projects:
1985 ZN1300
Please Log in or Create an account to join the conversation.
- Bad Kaw
- Offline
- User
- Flying Squirell
- Posts: 1750
- Thank you received: 13
Those are just some of the coolest projects going(insert clapping, massive respect emoticon here)
Post edited by: Bad Kaw, at: 2007/05/28 11:06
78 Kawasaki Z1R
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)
Please Log in or Create an account to join the conversation.
- steell
- Topic Author
- Offline
- User
I heard him take off from a stop when he turned around at the crossroad 1 mile away.
He will probably post his thoughts in his thread, so I'll let him describe it
Post edited by: steell, at: 2007/05/28 11:46
KD9JUR
Please Log in or Create an account to join the conversation.