Hi from Germany / Ruhr Area
- Samson46
-
Topic Author
- Offline
- User
- Martin, 34, born onto planet Zed.
- Posts: 7
- Thanks: 3
Hi from Germany / Ruhr Area
12 Aug 2024 04:04
Cheers everyone,
I'm Martin from West-Germany (town called Bottrop).
I grew up in a home of Zed-lovers (my mum rode a KZ900A4 green, my dad a 1300 which is now hanging at the wall in the living room) so I naturally gravitated towards old Zeds and oil cooled bikes in general.
My personal bike is a mix & match KZ1000A2 with 900 rear wheel, non-matching paint and oldschool 4-1 Marving pipe.
Currently it is sitting in the basement, waiting for it to be put together again, which I want to start this autum/winter.
I got the roller from my dad, it had a 5,5" wheel in it but back then I wanted the Mad Max look with the skinny wheel. Now I will go the big wheel route again, but with fresh engine, fresh paint, all in all I'd say stock modified.
I have a few parts left that I do not need anymore that I will advertise here shortly, some maybe recognize them from Facebook.
If you have any questions, hit me up and thanks for the activation!
Have a good one,
Martin
I'm Martin from West-Germany (town called Bottrop).
I grew up in a home of Zed-lovers (my mum rode a KZ900A4 green, my dad a 1300 which is now hanging at the wall in the living room) so I naturally gravitated towards old Zeds and oil cooled bikes in general.
My personal bike is a mix & match KZ1000A2 with 900 rear wheel, non-matching paint and oldschool 4-1 Marving pipe.
Currently it is sitting in the basement, waiting for it to be put together again, which I want to start this autum/winter.
I got the roller from my dad, it had a 5,5" wheel in it but back then I wanted the Mad Max look with the skinny wheel. Now I will go the big wheel route again, but with fresh engine, fresh paint, all in all I'd say stock modified.
I have a few parts left that I do not need anymore that I will advertise here shortly, some maybe recognize them from Facebook.
If you have any questions, hit me up and thanks for the activation!
Have a good one,
Martin
Ziel ist es, möglichst laut von A nach B zu kommen.
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
-
- Offline
- Moderator
- TURBO, Its Better to be Blown than Injected
- Posts: 4937
- Thanks: 2081
- TexasKZ
-
- Offline
- Platinum Member
- Posts: 7699
- Thanks: 2326
- Wookie58
-
- Offline
- Moderator
- Posts: 4449
- Thanks: 2606
- Samson46
-
Topic Author
- Offline
- User
- Martin, 34, born onto planet Zed.
- Posts: 7
- Thanks: 3
- Scirocco
-
- Away
- Premium Member
- Never change a running system
- Posts: 4264
- Thanks: 2119
Re: Hi from Germany / Ruhr Area
12 Aug 2024 20:15
Welcome from the re-united Germany, (no more West-East Germany, BRD-DDR since 1991 btw.).
Greetings to Bottrop (Ruhrgebiet) from Plettenberg (Sauerland)
My Z1B then and now......
Greetings to Bottrop (Ruhrgebiet) from Plettenberg (Sauerland)
My Z1B then and now......
My 1975 Z 1 B 900 Project
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
Please Log in or Create an account to join the conversation.
- Samson46
-
Topic Author
- Offline
- User
- Martin, 34, born onto planet Zed.
- Posts: 7
- Thanks: 3
- Mcdroid
-
- Offline
- User
- Gone Kwackers
- Posts: 6669
- Thanks: 337
- rstnick
-
- Offline
- User
- Posts: 4416
- Thanks: 384
Re: Hi from Germany / Ruhr Area
06 Sep 2024 17:17
Welcome Martin from Canada.
Nice looking Z!
Nice looking Z!
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project
Please Log in or Create an account to join the conversation.