KZR's Bikes of the Month for 2024

bobber...mounting rear fender

More
01 Sep 2006 20:10 #73988 by gr8funbikes
bobber...mounting rear fender was created by gr8funbikes
I am in the process of mounting a sportster rear fender on my kz 750 twin. Does any one have any ideas on how to go about this or has done something similar? I don't want to mount it under the frame. I was thinking about cutting the rear frame about half way between the shock mount and the end of the frame and useing that section as the fender struts. The only problem I have is if I do that the fender will sit way too high above the tire. Any suggestions would be great.
Thanks

82 KZ 750 CSR Twin

Please Log in or Create an account to join the conversation.

More
02 Sep 2006 05:32 #74025 by agawam
Replied by agawam on topic bobber...mounting rear fender
I mounted a fender on my twin,I drilled through the crossbrace thats just about to the rear where your battery is located,and used one stainless 1/4 20 bolt and rubber mounted it, in the rear I made a cross brace out of flatstock and used the tail piece mounts that were already on the frame, my frame was cut 4in behind the shock mounts

Post edited by: agawam, at: 2006/09/02 08:34
Attachments:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.