KZR's Bikes of the Month for 2024

Painting a new fuel tank

More
20 Aug 2018 11:51 - 20 Aug 2018 11:52 #789408 by loneagle
Painting a new fuel tank was created by loneagle
I just got a reproduction Z1 gas tank for my bike and was wondering if I should remove the primer they applied at the factory. The tank is made in Taiwan and I'm not sure if it's a decent quality primer. It looks like epoxy, but I could be wrong.

'78 Kawasaki KZ 1000
'02 Harley FXDWG
'16 Harley Street Glide
Last edit: 20 Aug 2018 11:52 by loneagle.

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • Offline
  • User
  • Sustaining Member
More
20 Aug 2018 12:59 #789410 by z1kzonly
Replied by z1kzonly on topic Painting a new fuel tank
At Least Primer is better than bare metal with an oil coating like the cheap Harley chi-comm crap guys bring me to paint!
Just wet sand it down with 400-600 to start, it will show you the low & high spots. I always put some simple green in my water when I wet sand in beginning.
I seal first with some epoxy primer thinned 10% xtra. Then I use my high build urethane grade primer for wet sanding before color coat.

Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

The following user(s) said Thank You: loneagle

Please Log in or Create an account to join the conversation.

More
20 Aug 2018 13:36 #789411 by Nessism
Replied by Nessism on topic Painting a new fuel tank
I would strip off the shipping primer and start fresh. For my last project I used Transtar Epoxy primer and it worked nicely.
The following user(s) said Thank You: loneagle

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.