KZR's Bikes of the Month for 2024

Adding Airtech Belly Pan to the LTD

  • Street Fighter LTD
  • Topic Author
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
05 Mar 2016 14:07 - 17 Mar 2016 11:37 #713984 by Street Fighter LTD
Adding Airtech Belly Pan to the LTD was created by Street Fighter LTD
Sneak peak at a small project . Adding a Airtech Belly Pan to my LTD. This is during trial fitting prior to paint. Ordered part in Black Gelcoat in hopes of being able to limit visible stone chips.










Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Attachments:
Last edit: 17 Mar 2016 11:37 by Street Fighter LTD.

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Topic Author
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
17 Mar 2016 11:42 #715848 by Street Fighter LTD
Replied by Street Fighter LTD on topic Adding Airtech Belly Pan to the LTD
Finally got pictures to load :laugh:
Come out to Gibraltar show in Mt Clemens MI. and help me figure out a stripe layout to make
the Belly Pan POP !!!!
Dave B) B) B)


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

More
17 Mar 2016 12:25 #715856 by pete greek1
Replied by pete greek1 on topic Adding Airtech Belly Pan to the LTD
rstnick's , belly pan POPS, :whistle:
Pete

1980 LTD 1000..,1976 LTD 900, have the 1000&900 now. the rest are previous= 1978 KZ 650 B.., 1980 Yamaha XT 500..,1978 Yamaha DT 400.., 1977 Yamaha yz 80..,Honda trail ct 70.., Honda QA 50...5-1/2 hp brigs & straton CAT chopper mini bike...3-1/2 hp mini bike (WHEN GAS WAS ABOUT 45 CENTS A GALLON)!!!!

Please Log in or Create an account to join the conversation.

More
17 Mar 2016 13:27 #715865 by davido
Replied by davido on topic Adding Airtech Belly Pan to the LTD
What ground clearance do you have with that on??
(Im worried that my 7.5cm might not be enough)

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

More
17 Mar 2016 13:37 #715866 by les holt
Replied by les holt on topic Adding Airtech Belly Pan to the LTD
Can't wait to see it! I'm out of work and putting topend on motor tonight and loading up. Hope to be there early afternoon.

Les

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Topic Author
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
17 Mar 2016 14:40 #715871 by Street Fighter LTD
Replied by Street Fighter LTD on topic Adding Airtech Belly Pan to the LTD

les holt wrote: Can't wait to see it! I'm out of work and putting topend on motor tonight and loading up. Hope to be there early afternoon.

Les


See you Friday Les ;)


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Topic Author
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
17 Mar 2016 14:44 #715872 by Street Fighter LTD
Replied by Street Fighter LTD on topic Adding Airtech Belly Pan to the LTD

davido wrote: What ground clearance do you have with that on??
(Im worried that my 7.5cm might not be enough)


I havent put a scale on it yet

Should be fine for the roads it will see.
I raised the back of the bike back up to stock to restore clearance and to make it look right
No doubt its just a little lower than a 4 into 1 header running under the bike would be
Dave


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Topic Author
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
17 Mar 2016 14:47 #715873 by Street Fighter LTD
Replied by Street Fighter LTD on topic Adding Airtech Belly Pan to the LTD

pete greek1 wrote: rstnick's , belly pan POPS, :whistle:
Pete


So Stripe it to look like it came off a Curtiss P 40 flying for the AVG in WW2 ?
I actually may work that into the final paint work
Dave B) B) B)


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

More
18 Mar 2016 07:01 - 18 Mar 2016 07:01 #716004 by 531blackbanshee
Replied by 531blackbanshee on topic Adding Airtech Belly Pan to the LTD
basically the same as the side cover.

leon

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Last edit: 18 Mar 2016 07:01 by 531blackbanshee.

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Topic Author
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
18 Mar 2016 17:38 #716089 by Street Fighter LTD
Replied by Street Fighter LTD on topic Adding Airtech Belly Pan to the LTD
I met a guy today at the bike show while setting up who does dipping in patterns.
Called Detroit Dip , imagine that LOL
Anyway
He can do my belly pan for 120 dollars if I want
I looked at a carbon fiber pattern which would look awesome.
Les and I are going to scope it out and come up with a game plan
Other than that I will tape stripe it to match the existing body work


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

More
18 Mar 2016 18:10 - 18 Mar 2016 18:14 #716092 by rstnick
Replied by rstnick on topic Adding Airtech Belly Pan to the LTD
Matching the striping would look good.
Dave, can you take some more pictures of her, as it's hard to see well in the pictures above.

B)

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project
Last edit: 18 Mar 2016 18:14 by rstnick.

Please Log in or Create an account to join the conversation.

More
18 Mar 2016 18:37 #716097 by les holt
Replied by les holt on topic Adding Airtech Belly Pan to the LTD
I'll snap off some high resolution shots this weekend and post them up. This feels good getting away from the daily rate race! I've not spent more than 10 minutes in the shop at one time in over 3 months till this week and did an almost complete build in 3 days! Wife and I sitting 5 minutes from Dave's house having a celebratory beer! Be there in a few bud!

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.