repainting emblems on KZ700

Any ideas on painting the emblems on my KZ? Its a KZ700 and the side emblems are like gold anodized w a black background..

No eBay APP ID and/or Cert ID defined in Kunena configurationHere's what the colors look like in case someone has a suggestion for the type / color code of paint. Ed

Revboyz wrote: Any ideas on painting the emblems on my KZ? Its a KZ700 and the side emblems are like gold anodized w a black background..

So as a comparison, what do the current emblems look like?

The emblems are weathered the red paint on the "KZ" is chipped and the black paint needs repainting.

The way I did the emblems & other stuff was to apply a light coating of grease on the raised areas, then spray the black. For the red I used Testor's model kit paint, applied w a brush.

Just touch the grease w your finger tip, then lightly pat to apply - it doesn't take much at all.
After the paint dries to the touch, wipe off the grease.

For the KZ700 emblems I would probably spray the red. After letting the black dry, mask the 700 & apply the grease where needed, they spray the KZ.

Thanks your emblems look good.

I agree with Martin, that's why I was asking about the current condition. As long as the fold is in good condition the red and black should be easy.

I think some guys don't bother w the grease. They just wipe off the excess paint before it dries.
Applying the grease is a bit tedious, but the emblems are so small it only takes a minute or so.
If necessary if spraying the red, you can probably use a toothpick to apply the grease in the tough spots.