KZR's Bikes of the Month for 2024

would this be safe??

More
22 May 2006 16:02 #49204 by jamestheron
would this be safe?? was created by jamestheron
im looking at a custom rear fender but the rear bar frame (fender mount) is in the way do you think it would be ok to cut the frame inch or two past the shocks and reweld tubing closer the the seat
400
Attachments:

Please Log in or Create an account to join the conversation.

More
22 May 2006 16:03 #49205 by jamestheron
Replied by jamestheron on topic would this be safe??
i borrowed the pic you can see the bar going over the rear fender

Please Log in or Create an account to join the conversation.

More
22 May 2006 17:11 #49232 by The Milkman
Replied by The Milkman on topic would this be safe??
If it was me, I would make a solid clamp type brace to go across in front of where you are going to cut it to hold the frame in place, just as a precautionary measure.
78 650-C2, Stock engine, Jardine 4-2 Exh., 17-38 sprockets, dyna ignition and coils, coil wiring mod, carb mod.

Please Log in or Create an account to join the conversation.

More
22 May 2006 18:06 #49250 by jamestheron
Replied by jamestheron on topic would this be safe??
oh definitely ill just weld a brace first then Fabe it up and then cut the brace off i think it will work i just want to hear your takes on the idea

Post edited by: jamestheron, at: 2006/05/22 21:07

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.