KZR's Bikes of the Month for 2024

vetter fairings for kz...

More
03 May 2006 10:01 #44798 by KZnannerz
vetter fairings for kz... was created by KZnannerz
hey er'body,

ime new to the forum...love this site! i recently lucked out and got a kz250 (don't know the year yet) for free! :woohoo:

my friend will get back w/me on the particulars. ive seen the bike. it's in very good condition...runs well...although she said i may want to get it serviced (of course!)...

my question is where do i find touring fairings for this kz? where do i looke for any accessories? ive been looking on the net but, very hard to find anything concrete.

if anyone can direct me to the sites any kz nut needs to know i would be forever beholdin'.

luv the bikes on this site. such talented people with great passion and creativity. i know ime in with good people.;)

thanks

Please Log in or Create an account to join the conversation.

More
03 May 2006 10:43 #44812 by mariozappa
Replied by mariozappa on topic vetter fairings for kz...
You'll find most Vetter fairings on Ebay.
They don't make them any more. But you can still find windshields and such for them at on line stores.
All accessory parts you can find at www.craigvetter.com

Post edited by: mariozappa, at: 2006/05/03 14:10

1977 KZ650C1
and the KZ650/KZ750 Conversion ;)

Please Log in or Create an account to join the conversation.

More
03 May 2006 11:23 #44820 by steell
Replied by steell on topic vetter fairings for kz...
The big Vetter (Windjammer/etc) would be a little large for your KZ250, try searching for a Vetter Quicksilver, it's a frame mount fairing made for the smaller bikes.
The chances of finding a mounting bracket for your bike are pretty slim, you will probably have to modify some other mounting bracket (off a different bike) to fit yours, bit of a PITA, but you can't buy the mounting brackets anymore.

Take a look at the handlebar mounted clear fairings, a whole lot less weight, a lot easier to install, and cheaper, while providing almost as much wind protection :)

Post edited by: steell, at: 2006/05/03 14:28

KD9JUR

Please Log in or Create an account to join the conversation.

More
05 May 2006 09:05 #45271 by vic44139
Replied by vic44139 on topic vetter fairings for kz...
You might just want to consider rolling with a windscreen. Would be much easier (generic) to mount and does a nice job of protecting you.;)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.