KZR's Bikes of the Month for 2024

Tail piece on 750 LTD

More
29 Jan 2006 12:09 #20412 by rcampbell
Tail piece on 750 LTD was created by rcampbell
I was just wondering if a plastic tail piece from a Z1 or KZ1000 or similar would be able to fit on my 1981 4cyl 750 LTD. I want to give it a sportier look and may eventually do a front end and swing arm swap as well.

Please Log in or Create an account to join the conversation.

More
04 Feb 2006 11:44 #21454 by DanOz7Five0
Replied by DanOz7Five0 on topic Tail piece on 750 LTD
The LTDs frame is different at the rear "hoop".

Thats not to say its not possible but its probably not a direct bolt on. The LTD frame is more rounded.

Please Log in or Create an account to join the conversation.

More
04 Feb 2006 12:19 #21462 by rstnick
Replied by rstnick on topic Tail piece on 750 LTD
There's a pic of creedmiller's 750 on page 2 in the Gallery of 750s.
.

Post edited by: rstnick, at: 2006/02/04 15:20
Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.