CB350 opinions wanted. Updated

OK, EDIT now that I found all the photos.
I took these last year at Pacific Raceways when Philcsand, Scumbag & I went to watch the sessions. I hope they help a little.


.

Post edited by: ran429, at: 2006/01/24 22:16

.

.

.

.

So here is where I am at right now. I am going with another streetfighter look like I did on my 1000. This will mostly looks and not performance. Ever seen a modern swingarm on a Cb350? Well here you go. CBR900 swingarm and wheel. It is just a mock up right now. I had to cut the center axle piece out of the swingarm and then grind it down about 1in total to get it to fit. The CB swingarm goes around the frame as compared to our bikes where the frame connects to the end of the swingarm. I just cut this swingarm up to see if it was possible. Now I need to find and front and rear end of a newer sport bike. The CBR wheels I have are trashed so it will be easier to just find a complete bike and cut it up.

Still looking for a donor parts bike. I have a few deals trying to get worked out now. FZR, ZX9 and VFR. Should be fun once I get the parts and really get into it. Should be ready for Mid-Ohio if I can get more than 2 hours a week to work on it.