KZR's Bikes of the Month for 2024

Bits and pieces for KZ750M1

More
27 May 2007 06:47 #143903 by ronjones
Bits and pieces for KZ750M1 was created by ronjones
Finally got my carbs, close to, dialed in, so I'm in the home stretch of this restore and am now, mostly, just trying to pretty her up. My original kick-start lever was, cosmetically, in pretty bad shape and was starting to jam up. I picked up one from the junkyard that works better than mine but is even worse shape, cosmetically. So, I'm looking for a decent lever, I'm also looking for the front fork, plastic "Kawasaki" emblem, my original is in pieces. Anyone got any ideas on where to get these bits?
Buykawasaki.com says the kick lever is common to most(all?) the 750 twins and the emblem (fork cover) is common to to many early '80's, 1100's, 1000's, 550's, 650's and 750's

Remember the Vets, may you have a safe and happy Memorial Day

Ron

Post edited by: ronjones, at: 2007/05/27 09:59

'82 KZ750 CSR, M1 twin. Mac 2-1 exhaust, K&N pods, 17tooth drive sprocket, Mikuni BS-34 carbs w/#47.5 pilot jet and #125 main jet, Canadian XS650 needlejetjet needle, Wired George's coil mod.
Barrak, Nancy and Harry says: Welcome to the United Soviet States of America, Comrades

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.