Fabricating Kawasaki brackets

So, we know that Kawasaki has some complicated brackets to do a variety of functions on many different models of motorcycles.  As our motorcycles age, replacement brackets are increasingly difficult to source and some members have had to fabricate replacment brackets. I, however, have not the technical skills or the equipment to do any bracket fabrications.  Specifically, I'm looking to fabricate the upper and lower mounting brackets for the fairing for the 1981 KZ1100-b1 (AKA 1981 GPz1100).  Note that this fairing did not come installed on the motorcycle but had to be purchased as an accessory from a Kawasaki dealer.  Luckily I have a set of the mounting  brackets so potentially a machinist could copy them.  My question is, can anyone suggest an individual or business that might be able to fabricate these mounts?

Greetings Bill:
Not sure why ATT would block KZRider but I seem to recall that this problem has cropped up before in our communications.  I have an easier solution...change my email to mjmccoid@gmail.com. I think I am going to migrate my communications to that venue...I'm not a big ATT fan anyway.

Mcdroid wrote:

Greetings Bill:
Not sure why ATT would block KZRider but I seem to recall that this problem has cropped up before in our communications.  I have an easier solution...change my email to mjmccoid@gmail.com. I think I am going to migrate my communications to that venue...I'm not a big ATT fan anyway.

Profile updated 

Hi McDroid.

I have done exactly that!  I fit a B2 bikini fairing to a 1981 GPZ 1100 B1  (KZT10B)

Below is what I fabricated:

 

I have a spare set as above...

 

You have far more skills than I do. What I'm looking for actually, is someone to replicate the KZ1100-B1 (aka 1981) mounting hardware.  I will attempt to post a photo later.

Mcdroid wrote:

You have far more skills than I do. What I'm looking for actually, is someone to replicate the KZ1100-B1 (aka 1981) mounting hardware.  I will attempt to post a photo later.

As it is an "accessory" part number you posted, does the "Partzilla" part number for a complete fairing come with the hardware ?

Wookie:

So, I asked Partzilla that very question and they responded that they 'suspected' that it was the fairing only (with no hardware or possibly also no windscreen).  Their reasoning being that Kawasaki sells single parts, not entire part sets. I suspect that they don't know what K46000-153A actually consists of...and I am currently unwilling to take a US$173 gamble. But it is enlightening to know that 40 year-old accessory parts are still available.

Mcdroid wrote:

Wookie:

So, I asked Partzilla that very question and they responded that they 'suspected' that it was the fairing only (with no hardware or possibly also no windscreen).  Their reasoning being that Kawasaki sells single parts, not entire part sets. I suspect that they don't know what K46000-153A actually consists of...and I am currently unwilling to take a US$173 gamble. But it is enlightening to know that 40 year-old accessory parts are still available.

FFS *@ - customer service at it's best (I guess it would be too much trouble for someone to actually "look in the box") from the brochure you posted it list's a single part number for "the accessory" not individual components. (I agree it's too much of a gamble to order on the off chance that it's all there)