- Posts: 1409
- Thank you received: 71
Spacer PVC
- Nessism
-
- Offline
- Sustaining Member
- Nessism
-
- Offline
- Sustaining Member
- martin_csr
-
- Offline
- User
25 Feb 2023 12:05 - 25 Feb 2023 12:23 #880737
by martin_csr
Replied by martin_csr on topic Spacer PVC
I'll probably install 25mm O.D. aluminum tubing & whatever I.D. seems appropriate for the fork spring seat & fork cap.
The stock steel spacer on my 1981 KZ650-CSR is 25mm O.D. steel (thin wall).
In the USA 3/4" pvc pipe = 1" O.D. (1" = 25mm), so that could be used as well.
The stock steel spacer on my 1981 KZ650-CSR is 25mm O.D. steel (thin wall).
In the USA 3/4" pvc pipe = 1" O.D. (1" = 25mm), so that could be used as well.
Last edit: 25 Feb 2023 12:23 by martin_csr.
Please Log in or Create an account to join the conversation.
- Move0ver
-
- Offline
- User
- Nessism
-
- Offline
- Sustaining Member
- riturbo
-
- Offline
- Sustaining Member
- Scirocco
-
- Offline
- Premium Member
- Never change a running system
- Wookie58
-
- Away
- Moderator
26 Feb 2023 00:40 #880759
by Wookie58
Replied by Wookie58 on topic Spacer PVC
I had mine made in alloy as part of my fork extensions ( they are 75mm long though so I think it would of been asking a lot of PVC)
Please Log in or Create an account to join the conversation.
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.