KZR's Bikes of the Month for 2024

1974 Z1 Master Cylinder Reassembly

More
18 Jun 2021 08:04 - 18 Jun 2021 08:05 #850360 by Mikaw
Replied by Mikaw on topic 1974 Z1 Master Cylinder Reassembly
Aslo make sure the eccentric adjuster bolt is not threaded in to deep. Install it without the lever. Eyeball to make sure you have no threads showing in the slot where the lever lives. If it’s threaded in to deep the lever hits the bolt and not the eccentric stem. You loose all of the adjustments. 
1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.
Last edit: 18 Jun 2021 08:05 by Mikaw.

Please Log in or Create an account to join the conversation.

  • DOHC
  • Topic Author
  • Offline
  • Sustaining Member
  • Those Doe-Hawks really go!
More
18 Jun 2021 13:24 #850372 by DOHC
Replied by DOHC on topic 1974 Z1 Master Cylinder Reassembly

Mikaw post=850359That’s road rash. The casting should be more pointed. 

Look at that!  I'll assume the cause was that my dad was up to some shenanigans, and then cleaned it up with some careful reshaping and a bit of filler.  Unfortunately the details of that story will forever remain a mystery.
'78 Z1-R in blue , '78 Z1-R in black, '78 Z1-R in pieces
My dad's '74 Z1
'00 ZRX1100

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.