KZR's Bikes of the Month for 2024

Swingarm switch, looking for bearing sizes

More
22 Mar 2020 20:58 #821478 by lewisj
Swingarm switch, looking for bearing sizes was created by lewisj
Replacing my 73 Z1 swingarm with a zrx 1200 swinger. Those builders that have made this switch, what swingarm shaft are you using and what are the new bearing sizes for correct fitment. Thanks in advance for any help!
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm

Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels

Please Log in or Create an account to join the conversation.

More
24 Mar 2020 20:35 - 24 Mar 2020 20:39 #821672 by TexasKZ
Replied by TexasKZ on topic Swingarm switch, looking for bearing sizes
There may be some useful info here.

kzrider.com/forum/11-projects/103381-76-kz900-upgrade

And here

kzrider.com/forum/11-projects/603289-kz1...x-swingarm-zx9r-fork
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
Last edit: 24 Mar 2020 20:39 by TexasKZ.
The following user(s) said Thank You: lewisj

Please Log in or Create an account to join the conversation.

More
27 Mar 2020 19:13 #821960 by lewisj
Replied by lewisj on topic Swingarm switch, looking for bearing sizes
Thanks TexasKZ! Tough to sort through all the builds and find exact measurements or diagrams, but this info really helps.
1973 Z1
1075cc MTC kit
Andrews 3X cams
ZRX 1200 swingarm

Vance&Hines header/ exhaust
29mm smoothbores w/pods
ZR7S 41mm Front Forks with 17" wheels

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.