KZR's Bikes of the Month for 2024

Kz750 E1(4) swingarm swap with ZRX1100

More
17 Nov 2019 03:30 - 17 Nov 2019 03:33 #814082 by zed1015
Replied by zed1015 on topic Kz750 E1(4) swingarm swap with ZRX1100

Rick H. wrote: I didn't pay mush attention to this thread as I don't see myself ever doing something like this, but none-the-less Zed105 what an ingenious idea for trimming the swingarm. I will have to put that one into my memory banks for future reference if needed. I can't quite tell from the picture you posted, but is the tool steel post just placed in a round hole and locked down with a set screw or did you manufacture the hole in the spindle to fit the tool steel post?
Rick H.

The hole is just a cross drilling with a set screw at 90 degrees to lock the tool steel in position..
The square section tool steel can be rotated in the hole to get the best angle for the cutting edge.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/23-for-sale/611992-air-c...lide-mikunis?start=0





Last edit: 17 Nov 2019 03:33 by zed1015.
The following user(s) said Thank You: Rick H.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.