KZR's Bikes of the Month for 2024

KZ 1000 A1 Single Master Cylinder

More
28 Jun 2006 08:04 #57720 by dog pound
Replied by dog pound on topic KZ 1000 A1 Single Master Cylinder
Let me know how much and send pic if possible to danmansfield@rogers.com

Please Log in or Create an account to join the conversation.

More
28 Jun 2006 08:05 #57722 by dog pound
Replied by dog pound on topic KZ 1000 A1 Single Master Cylinder
The Hyd line does not run direct from res to dice, about half way down is a "banjo Bolt" splitter or T the the lines go into.

Post edited by: dog pound, at: 2006/06/28 16:41

Please Log in or Create an account to join the conversation.

More
28 Jun 2006 21:18 #57961 by rattler
Replied by rattler on topic KZ 1000 A1 Single Master Cylinder
is it a single disk front brake setup?
if so just run it straight to the caliper and dont bother with the t. you will have a better brake that way.

Please Log in or Create an account to join the conversation.

More
29 Jun 2006 02:06 #57979 by dog pound
Replied by dog pound on topic KZ 1000 A1 Single Master Cylinder
So the banjo bolt is not required? OK can I run a hose or steel line. This is for a springer front end. Yes it is a single disc.

Post edited by: dog pound, at: 2006/06/29 17:18

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.