KZR's Bikes of the Month for 2024

Brake Reassembly

  • letthegoodtimesroll
  • Topic Author
  • Offline
  • User
More
18 May 2006 15:12 #48265 by letthegoodtimesroll
Brake Reassembly was created by letthegoodtimesroll
When putting the brake calipers on the mounts, what type, if any, grease should you use?
1977 KZ650C1, Kerker Header, Dyna ignition and coils, GPZ 750 oil pan and cooler

Please Log in or Create an account to join the conversation.

More
18 May 2006 20:38 #48359 by OKC_Kent
Replied by OKC_Kent on topic Brake Reassembly
If I recall , one manual I have said to use a hi temp grease, and not much of it. I think there is a special brake grease available at the auto parts stores.
Oklahoma City, OK
78 KZ650 B2 82,000+ miles

Please Log in or Create an account to join the conversation.

  • letthegoodtimesroll
  • Topic Author
  • Offline
  • User
More
19 May 2006 04:55 #48397 by letthegoodtimesroll
Replied by letthegoodtimesroll on topic Brake Reassembly
That's what I used. I had some hi temp disc brake wheel bearing grease so I just rubbed some on the bolts and put them through before I actually assembled the entire thing. Thanks for your response!
1977 KZ650C1, Kerker Header, Dyna ignition and coils, GPZ 750 oil pan and cooler

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.