KZR's Bikes of the Month for 2024

Rear Hub Bearings

More
10 Oct 2005 12:42 #415 by Tazzmann
Rear Hub Bearings was created by Tazzmann
Hey guys, I have a 1981 KZ440 D3 LTD that I am trying to get the rear hub bearings out of. I got the clip off that holds them in place, but I can't get the inner bushing that sits bewteen the bearings to move enough to get a rod in there and tap out the bearing on the opposite side. Is there another trick to this that I am not aware of, ir should I soak the inside of the hub with degreaser in hopes that it might free something up?

Thanks!

Please Log in or Create an account to join the conversation.

More
10 Oct 2005 12:53 #419 by PuGz
Replied by PuGz on topic Rear Hub Bearings
If there is a bunch of gunk in there or if the grease is hard as a rock then yes some degreaser could help.

Please Log in or Create an account to join the conversation.

More
10 Oct 2005 15:14 #450 by Tazzmann
Replied by Tazzmann on topic Rear Hub Bearings
yeah, I can't tell what is in there or not and I am not familiar enough whith that section of the bike to know how far that inner bushing is supposed to move. I think I will throw some degreaser in there tonight and see if I can get anything to free up.

Thanks!

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.