KZR's Bikes of the Month for 2024

KZ1100 swing arm removal

More
11 Apr 2006 10:05 #38618 by KevZ
KZ1100 swing arm removal was created by KevZ
Does anybody have a suggestion for removing the pivot shaft from the swingarm? Mine seems to be welded, and I want to paint the frame and replace those bearings......

Please Log in or Create an account to join the conversation.

  • wireman
  • Visitor
11 Apr 2006 10:15 #38620 by wireman
Replied by wireman on topic KZ1100 swing arm removal
put a breaker bar on the bolt after you remove the nut if the bolt will spin find a piece of 1/2-5/8" rod and use it to pound the bolt out.do not use 1/2" drive extension the square end will get stuck in swingarm bushing,dont ask me how i know!:whistle: :woohoo: goodluck,happy wrenching!

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.