KZR's Bikes of the Month for 2024

LTD Question

More
07 Apr 2006 08:27 #37556 by lorandunn
LTD Question was created by lorandunn
Let me get this straight, the rake is greater on the LTD version than on the standard KZ650, right? Which forks would you recommend then in order to get a sportier "cafe" look and overcome that cruiser-ish rake?

Please Log in or Create an account to join the conversation.

More
07 Apr 2006 15:13 #37638 by RomSpaceKnight
Replied by RomSpaceKnight on topic LTD Question
Depends if rake is due to head tube angle or triple offset.

Please Log in or Create an account to join the conversation.

More
07 Apr 2006 16:01 #37653 by lorandunn
Replied by lorandunn on topic LTD Question
Hmm, good question...I guess I'll just cross that bridge when I come to it.

Please Log in or Create an account to join the conversation.

More
07 Apr 2006 19:59 #37723 by Mellvis
Replied by Mellvis on topic LTD Question
I assume you have the 1980 650 LTD (E model). If so the rake is a little more than the B and C model. The triple clamps are the same as B and C, but the head angle on the frame is more and it has a 16 inch rear wheal as opposed to the 18 inch rear wheel of the B and C model. You can compensate by sliding the forks about an inch higher in the clamps and getting longer shocks. This WILL change the riding characteristics considerably!! It may not be the safest thing to do, however I've done several KZ's of my own with succes, but I ride slow and easy these days.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.