KZR's Bikes of the Month for 2024

re-using head bearings

More
11 Mar 2006 18:56 #30196 by steell
Replied by steell on topic re-using head bearings
OKC_Kent wrote:

My factory manual has 19 top, 20 bottom. They are 1/4". When I replaced mine for tapered I noticed the bottom race was dented from the balls. It had a small split starting too.


Yeah, those wheelies will do that :evil: :evil:

KD9JUR

Please Log in or Create an account to join the conversation.

  • xstreamcanadian
  • Topic Author
  • Offline
  • User
More
12 Mar 2006 17:09 #30435 by xstreamcanadian
Replied by xstreamcanadian on topic re-using head bearings
thanks guys, I got it all back together, filled to the brim with bearing grease. It is smooth as glass. the races appeared to be fine. I did notice that when I tighten up the BIG nut on top of the triple tree she got to feel a little chunky, so i backed it off until it felt smooth. Is there something I should know here or did I make the right call.

Please Log in or Create an account to join the conversation.

  • wireman
  • Visitor
12 Mar 2006 17:13 #30437 by wireman
Replied by wireman on topic re-using head bearings
if you mean the round nut with holes for spanner wrench you did fine.do not overtighten or you will put flat spots in bearings over time.;) goodluck,happy wrenching!

Please Log in or Create an account to join the conversation.

  • xstreamcanadian
  • Topic Author
  • Offline
  • User
More
12 Mar 2006 18:03 #30447 by xstreamcanadian
Replied by xstreamcanadian on topic re-using head bearings
yup that would be the one. I went habd tight and then a few taps with a screwdriver and small hammer.... seems ok. The stripped down and repainted triple looks awesome. IMHO

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.