KZR's Bikes of the Month for 2024

dual front disk from single on 650

More
02 Mar 2006 18:08 #27668 by 77KZ650
dual front disk from single on 650 was created by 77KZ650
Hi, my 650 has a single rotor on the front wire wheel (19 inch), can I just bolt another rotor on the other side to get duals or is there something I'm forgetting? are the rotors for opposing sides different? thanks
pics to follow if needed

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

  • wireman
  • Visitor
02 Mar 2006 18:14 #27670 by wireman
Replied by wireman on topic dual front disk from single on 650
try and find a matched set of rotors dual disc bikes have thinner rotors or find another thick one to match yours.if you can find a caliper off a 77 bike with a single disc you should be able to use everything if your is behind fork on your bike you can take the 77 front mount caliper and put it behind fork on right side.:whistle: goodluck,happy wrenching!

Please Log in or Create an account to join the conversation.

More
02 Mar 2006 19:03 #27694 by rede4u
Replied by rede4u on topic dual front disk from single on 650
I think it should be a straight bolt on. Remember to increase the reservoir for the extra capacity.

Please Log in or Create an account to join the conversation.

  • wireman
  • Visitor
02 Mar 2006 19:15 #27702 by wireman
Replied by wireman on topic dual front disk from single on 650
the mastercylinder should be the same once you fill the system after its all together that should be it;)

Please Log in or Create an account to join the conversation.

More
02 Mar 2006 19:23 #27706 by 77KZ650
Replied by 77KZ650 on topic dual front disk from single on 650
Just went out and got some pics. Would it matter if the rotors were different thicknesses? How much of a difference is there? I measured my rotor, it looked like 6mm thick. My caliper is in front of the forks, how much work is it to change it to the back? switch forks in trees?... then is there fender issues? (I read in a link on here somewhere awhile back that the bike will be more stable with the calipers mounted behind the forks)

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH
Attachments:

Please Log in or Create an account to join the conversation.

More
02 Mar 2006 19:25 #27707 by 77KZ650
Replied by 77KZ650 on topic dual front disk from single on 650

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH
Attachments:

Please Log in or Create an account to join the conversation.

More
02 Mar 2006 19:25 #27708 by 77KZ650
Replied by 77KZ650 on topic dual front disk from single on 650
just bolts on here right? no spacers?


Post edited by: 77KZ650, at: 2006/03/02 22:27

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH
Attachments:

Please Log in or Create an account to join the conversation.

More
02 Mar 2006 19:41 #27727 by 77KZ650
Replied by 77KZ650 on topic dual front disk from single on 650

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH
Attachments:

Please Log in or Create an account to join the conversation.

  • wireman
  • Visitor
02 Mar 2006 19:43 #27728 by wireman
Replied by wireman on topic dual front disk from single on 650
ive allways done it for cosmetic reasons.ok if yours is allready in front youll need a caliper off a bike behind the forks off left side.we used to cut the caliper mounts off and weld them on backside,but have since been told you can just swap the legs from one side to the other just make sure to keep the caps on the right legs.:whistle: goodluck,happy wrenching!

Please Log in or Create an account to join the conversation.

More
02 Mar 2006 19:57 #27731 by 77KZ650
Replied by 77KZ650 on topic dual front disk from single on 650
Actually I was planning on using different calipers.... should have mentioned that I guess, they are from a 92 ZX600, saw them on ebay without a reserve and got em for $1 :woohoo: (plus shipping of course)(just won them other night, dont have them yet) I'm guessing I'll be making some custom brackets to get them to work.

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH
Attachments:

Please Log in or Create an account to join the conversation.

  • wireman
  • Visitor
02 Mar 2006 20:03 #27733 by wireman
Replied by wireman on topic dual front disk from single on 650
what do you want for the old caliper?;)

Please Log in or Create an account to join the conversation.

More
02 Mar 2006 20:11 #27734 by 77KZ650
Replied by 77KZ650 on topic dual front disk from single on 650
Haha honestly I have no idea what its worth, but you can have first dibs on it once I get the zx ones to work (need a back up plan if I cant figure them out lol):)
I'll pm you once/if I get them setup

Post edited by: 77KZ650, at: 2006/03/02 23:21

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.