KZR's Bikes of the Month for 2024

badly needed part?

More
23 Feb 2006 18:20 #25986 by roy-b-boy-b
Replied by roy-b-boy-b on topic badly needed part?
Will one off a GS 1000 work? 1980 model year? Roy

1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

More
23 Feb 2006 22:44 #26055 by dnestell
Replied by dnestell on topic badly needed part?
yes actually that 80 axle should work! do you have the spacers and brake braket too. that would be great.

Please Log in or Create an account to join the conversation.

More
23 Feb 2006 22:57 #26058 by 77KZ650
Replied by 77KZ650 on topic badly needed part?
If you can cut and weld, you can make the kz bolt work, just add a piece of round stock (or a chunk of another bolt the same diameter)in the middle. just get it straight!;) good luck

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

More
24 Feb 2006 04:24 #26073 by roy-b-boy-b
Replied by roy-b-boy-b on topic badly needed part?
I just removed the axle,brake system,including the rear caliper stablizer bar and all the spacers.
The bike was basically complete.
U2U me about the parts. Roy

1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.