KZR's Bikes of the Month for 2024

output shaft diameter size question

More
17 Oct 2005 10:36 #2344 by galaxian
output shaft diameter size question was created by galaxian
Does anyone know the diameter of the output shaft on the front sproket for the 650 and 900? I need to know if they are the same of differnt sizes.
1977 KZ1000A1, 1979 KZ650 C3

Please Log in or Create an account to join the conversation.

More
17 Oct 2005 11:23 #2350 by OnkelB
Replied by OnkelB on topic output shaft diameter size question
I did some research on this subject a while back - check the last post in this thread for details. Also check the link to JT that Jeff posted there, very useful.

The 650 and 900 output shafts are the same (25mm/13 spline), but the sprockets are not as the 900 uses a 630 chain.

Post edited by: onkelb, at: 2005/10/17 15:53
77 KZ 650 B1, 82 GPz 1100 B2.

Please Log in or Create an account to join the conversation.

More
17 Oct 2005 12:14 #2359 by galaxian
Replied by galaxian on topic output shaft diameter size question
Thanks for the info. I ended up calling who else...Z1 enterprises and as usuall Jeff had tons of great info. He acutually pointed me to this web site great stuff.

Go here www.jtsprockets.com/52.0.html enter your bike and see the specs on your sproket.

Brilliant!

Oh if Jeff if you read this. THANKS!

Post edited by: galaxian, at: 2005/10/17 15:15
1977 KZ1000A1, 1979 KZ650 C3

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.