750 wire harness work?

i got a parts bike and wanted to know if the wireharness will work on my mangled-up mess of wires on my 77650b-1.

the parts bike is a 1979 kz750h all stock/no motor.
but it has a good harness on it. is there any other parts work such as headlight ect...

KZ750H would have to be an 80 or newer model and with electronic ignition.
If you got the complete bike then you should be able to make it work, even use the 750 ignition switch if needed.

Post edited by: steell, at: 2006/09/30 18:20

the info card (on frame) says # kz750h000518 8/79 but probally came out in 80'

thanks for your help! i may just use that ignition switch to!

Steell, does the KZ750H have the same charging system as the 77 650? That's the three-phase one with a field-coil and two-piece reg and rec.

Nope, 750H uses a permanent magnet alternator, no coil, but you can swap the rotor, stator, sidecover, and reg/rec, onto your 650. Makes using the 750 wiring harness easier.