- Posts: 203
- Thank you received: 1
82 kz1000m ignition switch solder
- squints
-
Topic Author
- Offline
- User
19 Sep 2006 05:37 #77772
by squints
traded my classic Kz's for a 2001 Kz1200r
Upstate NY
82 kz1000m ignition switch solder was created by squints
Ok, I've been documenting my ignition problems on this board and I finally have some pics. I've been soldering the white wire to the point I think it is supposed to be connected to, but now I'm not so sure.
Let me know what you all think. What point should this wire be soldered to. I have been attaching it to the point above, the more silver one. But am I wrong and shold it be attached to the lower more bronze colored one?????
Post edited by: squints, at: 2006/09/19 08:38
Post edited by: squints, at: 2006/09/19 11:31
Let me know what you all think. What point should this wire be soldered to. I have been attaching it to the point above, the more silver one. But am I wrong and shold it be attached to the lower more bronze colored one?????
Post edited by: squints, at: 2006/09/19 08:38
Post edited by: squints, at: 2006/09/19 11:31
traded my classic Kz's for a 2001 Kz1200r
Upstate NY
Attachments:
Please Log in or Create an account to join the conversation.
- squints
-
Topic Author
- Offline
- User
- squints
-
Topic Author
- Offline
- User
- wireman
- Visitor
20 Sep 2006 06:37 #78116
by wireman
Replied by wireman on topic 82 kz1000m ignition switch solder
i dont have a csr to compare notes with.
Please Log in or Create an account to join the conversation.
- OKC_Kent
-
- Offline
- User
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.