KZR's Bikes of the Month for 2024

Blue and red wire .

More
30 Oct 2023 09:14 #891120 by Jokinarnya
Blue and red wire . was created by Jokinarnya
I have a blue and red wire hanging under my bike next to the stand.
Am I right in thinking it's for the oil pressue sensor? 
If so, does it just connect under the screw in the sensor.
If not, where do I put it?
TIA

1982 Kz550 LTD

Please Log in or Create an account to join the conversation.

More
30 Oct 2023 09:16 #891121 by Wookie58
The following user(s) said Thank You: Nessism

Please Log in or Create an account to join the conversation.

More
30 Oct 2023 11:03 #891130 by jwfels
Replied by jwfels on topic Blue and red wire .
quite common wire, oil pressure, if 900/1000 paired up in alternator wiring, which is near side stand, 650 is in ignition area on right side under cover

Z1A AND 81 650

Please Log in or Create an account to join the conversation.

More
30 Oct 2023 11:55 #891132 by Jokinarnya
Replied by Jokinarnya on topic Blue and red wire .
Its a 1982 kz550 c3, pribably should have mentioned that initially.  

1982 Kz550 LTD

Please Log in or Create an account to join the conversation.

  • hugo
  • Offline
  • Sustaining Member
  • '92 Zephyr 750
More
30 Oct 2023 13:18 - 30 Oct 2023 13:19 #891133 by hugo
Replied by hugo on topic Blue and red wire .
Yes, the color matches the Oil Sensor switch wire color code...........and yes, normally i'ts got a felmale plug to go into the sensor, and that's it.     The ground is the sensor body and the engine.    It should work if the sensor is OK
Last edit: 30 Oct 2023 13:19 by hugo.

Please Log in or Create an account to join the conversation.

More
30 Oct 2023 13:56 #891134 by Jokinarnya
Replied by Jokinarnya on topic Blue and red wire .
The connection I can see isn't a plug. I don't know the correct name for it, buts a circular connector with a bit cut out, not dissimilar to a circlip shape. 
it's obviously been clipped onto or around something at some point, I judt dont know what.
 

1982 Kz550 LTD

Please Log in or Create an account to join the conversation.

More
30 Oct 2023 20:08 #891141 by TexasKZ
Replied by TexasKZ on topic Blue and red wire .
Yes, the blue/red is the oil pressure sender wire and it should go under the screw on the sending unit.

Here is a color wiring diagram.   www.kzrider.com/filebase?task=download.send&id=281&catid=62&m=0

here is the factory service manual, though the wiring diagrams are sadly black and white.   www.kzrider.com/modules/ServiceManuals/Kz400500550_79to83.pdf

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24

Please Log in or Create an account to join the conversation.

More
31 Oct 2023 05:19 - 31 Oct 2023 05:22 #891146 by martin_csr
Replied by martin_csr on topic Blue and red wire .
Fork terminal or fork spade terminal.  

KZ650 pic is just to show the terminal. 
Last edit: 31 Oct 2023 05:22 by martin_csr.
The following user(s) said Thank You: Jokinarnya

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.