KZR's Bikes of the Month for 2024

92026-1031 Thrust washer size question..

  • Gdailey2112
  • Topic Author
  • Offline
  • User
  • 82 KZ1100D1
More
19 Aug 2020 02:04 #833182 by Gdailey2112
92026-1031 Thrust washer size question.. was created by Gdailey2112
Does this thrust washer sit perfectly within the recessed area that's located just before the starter clutch needle bearings? Or is the bearing smaller than the recessed area? Please lmk. TY
1982 KZ1100D1

Please Log in or Create an account to join the conversation.

More
19 Aug 2020 03:12 #833187 by zed1015
Replied by zed1015 on topic 92026-1031 Thrust washer size question..
Pics needed.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/23-for-sale/611992-air-c...lide-mikunis?start=0





Please Log in or Create an account to join the conversation.

  • Gdailey2112
  • Topic Author
  • Offline
  • User
  • 82 KZ1100D1
More
20 Aug 2020 23:55 #833380 by Gdailey2112
Replied by Gdailey2112 on topic 92026-1031 Thrust washer size question..
Found these dimensions listed as a spacer 25x38x1.0 Is that metric?
1982 KZ1100D1

Please Log in or Create an account to join the conversation.

More
21 Aug 2020 00:01 #833381 by kevski
Replied by kevski on topic 92026-1031 Thrust washer size question..
If you are talking about the bronze washer the answer is yes to metric sizing, and they only go on one way round,

Please Log in or Create an account to join the conversation.

  • Gdailey2112
  • Topic Author
  • Offline
  • User
  • 82 KZ1100D1
More
21 Aug 2020 23:16 #833472 by Gdailey2112
Replied by Gdailey2112 on topic 92026-1031 Thrust washer size question..
So it'd be: 25mm x 38mm x 1 mm?
1982 KZ1100D1

Please Log in or Create an account to join the conversation.

More
22 Aug 2020 06:49 #833479 by martin_csr
Replied by martin_csr on topic 92026-1031 Thrust washer size question..
Yes, it's metric.
1981 KZ650 Competition Sports and Road
The following user(s) said Thank You: Gdailey2112

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.