KZR's Bikes of the Month for 2024

Magneto position, KZ440

  • Onlybackroads
  • Topic Author
  • Offline
  • User
More
04 Nov 2019 18:14 #813558 by Onlybackroads
Magneto position, KZ440 was created by Onlybackroads
Hey everyone first post here, just picked up a 1982 kz440 belt drive.

The starter stopped engaging so I decided to pull the cover and see what was up, turns out the flywheel/magneto bolt came loose and was just spinning the ring gear, not moving the flyheel/started clutch. Unfortunately this means the flywheel lost its position on the taper. Can anyone help in pointing out any information as to location the correct position of the flywheel in correspondence to timing? Thanks a lot, hope to get this thing going at some point!

-Sean

Please Log in or Create an account to join the conversation.

More
05 Nov 2019 02:45 #813571 by Nebr_Rex
Replied by Nebr_Rex on topic Magneto position, KZ440
There is no set position, just tighten the bolt.


.
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected

www.dotheton.com/forum/index.php?topic=39120.0


.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.