KZR's Bikes of the Month for 2024

How to install new plug wires?

More
09 Jul 2006 11:39 #60492 by kzmarvo
How to install new plug wires? was created by kzmarvo
How do the wires come out of the stock coils on a kz 900? They look like they are glued in, i dont wanna mess anything up. I bought some colored wires and dont wanna fubar anything.

Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)

Please Log in or Create an account to join the conversation.

  • RetroRiceRocketRider
  • Offline
  • User
  • ...bring in the machine that goes PING!
More
09 Jul 2006 11:56 #60496 by RetroRiceRocketRider
Replied by RetroRiceRocketRider on topic How to install new plug wires?
You are correct, the wires on the older KZ's are molded into the coils themselves.

I've heard of folks who have "shaved" off the area where the wires enter the coils to access the studs to attach the wires to, and then reseal them when done.
But it would be easier to just purchase wire splicers ( NGK Plug Wire Splicers) to attach them.

Post edited by: RetroRiceRocketRider, at: 2006/07/09 15:01

Covina, So Calif!
78 KZ650-B2 = SOLD
84 ZN700 LTD = SOLD
84 ZX750 GPz = SOLD
89 GSX1100F Katana = SLEEPING :-/
20 VN1700 Vulcan Vaquero (the Blue Cowboy)
Looking for my next project KZ

Please Log in or Create an account to join the conversation.

More
09 Jul 2006 11:58 #60497 by kzmarvo
Replied by kzmarvo on topic How to install new plug wires?
So it is easy as that?

Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)

Please Log in or Create an account to join the conversation.

  • RetroRiceRocketRider
  • Offline
  • User
  • ...bring in the machine that goes PING!
More
09 Jul 2006 12:01 #60500 by RetroRiceRocketRider
Replied by RetroRiceRocketRider on topic How to install new plug wires?
kzmarvo wrote:

So it is easy as that?


Yup. ;)

Covina, So Calif!
78 KZ650-B2 = SOLD
84 ZN700 LTD = SOLD
84 ZX750 GPz = SOLD
89 GSX1100F Katana = SLEEPING :-/
20 VN1700 Vulcan Vaquero (the Blue Cowboy)
Looking for my next project KZ

Please Log in or Create an account to join the conversation.

More
09 Jul 2006 13:23 #60524 by steell
Replied by steell on topic How to install new plug wires?
So the coils on your bike are almost 30 years old, how long do you expect them to last? :)

Accel or Dyna coils can be purchased for $120-$140, and it's well worth replacing the antique worn out coils that are on there now.

It's well known that I am a cheapskate, and even I think it's worthwhile to do :D :D

I have not read a post yet where someone said that new coils did not improve the way their bike runs :)

KD9JUR

Please Log in or Create an account to join the conversation.

More
09 Jul 2006 14:36 #60541 by EddieBoy
Replied by EddieBoy on topic How to install new plug wires?
i cut the wires about 2 inches from the coils and soldered on four of the lil screw on caps left over from my new plugs. now i can change the wires when i want. i use the long straight plug boots to the coils and i got some ceramic boots for the plug ends.
Attachments:

Please Log in or Create an account to join the conversation.

More
09 Jul 2006 14:37 #60542 by EddieBoy
Replied by EddieBoy on topic How to install new plug wires?
without the wire
Attachments:

Please Log in or Create an account to join the conversation.

More
09 Jul 2006 15:31 #60546 by kzmarvo
Replied by kzmarvo on topic How to install new plug wires?
i dont plan to replace them coils till there dead, just puttin some colored wires on for the pimp effect.B)

Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)

Please Log in or Create an account to join the conversation.

More
09 Jul 2006 15:32 #60547 by kzmarvo
Replied by kzmarvo on topic How to install new plug wires?
And if ya'll dont think colored wires are pimp you would be WRONG! hahahahahaha:laugh:

Watch it folks,i have sticky fingers when it comes to a nice looking set of handle bars:)

Please Log in or Create an account to join the conversation.

More
09 Jul 2006 18:11 #60571 by Kickinchicken
Replied by Kickinchicken on topic How to install new plug wires?
Did you use the resistor ends that go on the plug or just regular boots?? My resistor boots are cracked and worn out I was wondering if the regular boots made any difference.

Post edited by: Kickinchicken, at: 2006/07/09 21:13

Please Log in or Create an account to join the conversation.

More
09 Jul 2006 20:43 #60627 by EddieBoy
Replied by EddieBoy on topic How to install new plug wires?
i used BERU #ck4 white ceramic 0-ohm boots at the plug with accel spiral core 8mm wires and the long boots that came with them at the coils. spark is nice and blue at the plug. i have never measured the resistance on the wires. the Beru's look vintage and ive had many comments on them. i like them way better than the factory black stuff.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.