IC IGNITER ?

Slammed,
The Dyna III replaces the pickup, rotor (on the mechanical advancer), and ignitor. The DYna III requires the ignition coils to be 3-ohms or higher otherwise the life of the Dyna may be shortened.

The stock coils, for KZ's with electronic ignition, are 2.5 ohms. If the 1981 650 CSR had points, then the stock coils should be 4-ohms.

Post edited by: loudhvx, at: 2006/08/07 01:37

Thanks for the reply I am guessing after doing some reading that the 81 did not have points it came with electronic ignition now I just need to find out why I dont have any spark

P.s anybody know where this wire goes??

loudhvx wrote:

Slammed,
The Dyna III replaces the pickup, rotor (on the mechanical advancer), and ignitor. The DYna III requires the ignition coils to be 3-ohms or higher otherwise the life of the Dyna may be shortened.

The stock coils, for KZ's with electronic ignition, are 2.5 ohms. If the 1981 650 CSR had points, then the stock coils should be 4-ohms.<br><br>Post edited by: loudhvx, at: 2006/08/07 01:37

Post edited by: Slammed, at: 2006/08/07 06:22

Oops forgot the picture

Post edited by: Slammed, at: 2006/08/07 06:28

3rd time is a charm LOL


Strange image size ??

I believe that wire is for add-ons. I don't think it should be connected to anything.

ok thanks