Need 250 igniter info

Yeah, it's the same questions I was asking 6 months ago when I was here. I have an '83 KZ250 motor with no wire harness and no diagrams. I need to wire in the igniter. It has five prongs, it's the electronic advance. Which prong goes to what?
---
- -

Post edited by: skitch, at: 2005/11/02 17:02

Get me a fax number and I'll send you a copy of the wiring diagram.

I don't have a fax. Can you scan that portion and email or post it?
That's the only part I need. I have completed the rest of the wiring without needing a diagram.
The captions' not quite right- it's an '83
Here's my dilema,

Post edited by: skitch, at: 2005/11/02 00:02

Post edited by: skitch, at: 2005/11/02 17:03

Post edited by: skitch, at: 2005/11/03 20:49

I don't even need a diagram so much; If someone printed my pic and wrote in the details, you could mail it to me!

I found the Z250/Z305 manual at work, but I forgot to bring it home. I will remember to bring it home tomorrow.

O.K. heres the deal. I have a factory manual # 99924-1019-04 and it only goes up to 1982 (which is a points ignition). Let me check one more time for something covering 1983. I do apologize, I thought I had it covered.

Using factory manual #99924-1023-04 (page 237 1981 supplement chapter) this is what I've come up with.
And using your caption, top row, left to right #1=coil, #2=ground, #3=pickup(-)
Bottom row, left to right #1=battery and #2=pickup(+)
Hope this is right and helps.

Looks like a good start. I'll let you know when it's running. To be sure I understood, is this what you mean?

Thanks a lot!

Post edited by: skitch, at: 2005/11/03 20:48

That is correct sir, or at least thats the way I read it in the manual. Good luck and keep us posted.