KZR's Bikes of the Month for 2024

stator pulling gone horribly awry

More
12 Jun 2006 10:14 #53938 by cary
stator pulling gone horribly awry was created by cary
in keeping with the KZ corollary to murphy's law, everything I try to do to my bike winds up taking twice as long as I had planned and being three times as expensive.

This weekend, we tried pulling off the the rotor on my '82 CSR, and wound up breaking a couple pullers, and bending up the rotor. Still didn't get it off.

Now I'll be needing another permanent magnet rotor.

Also an internal, bolt-type puller.

My question is this: will any old bolt work, or will I need to get a hardened steel specialized flywheel puller type?

I really want to avoid the hell that is a broken bolt stuck in my engine.

Post edited by: cary, at: 2006/06/12 13:30

Please Log in or Create an account to join the conversation.

More
12 Jun 2006 10:30 #53943 by cary
Replied by cary on topic stator pulling gone horribly awry
I have been looking for the proper size bolt. A lot of sites sell a 18mm x 1.5-R.H.-Internal, Male flywheel puller bolt for this, however, this seems a bit too big. can anyone verify if this is the proper size?


(BTW - anyone want to sell a J-model magneto rotor or the puller bolt? U2U if so.)

Please Log in or Create an account to join the conversation.

More
12 Jun 2006 14:22 #53994 by steell
Replied by steell on topic stator pulling gone horribly awry
Generally either the rear axle or the steering head bolt works.

How are you trying to get it off, and is it a taper fit or is it keyed? If it is keyed you should be able to see a slot in the crank and/or rotor. If it is a taper fit, screw a bolt in as tight as you can possibly get it and then give the head of the bolt a good smack with the hammer.

KD9JUR

Please Log in or Create an account to join the conversation.

  • lemo32
  • Offline
  • User
  • The Price of Cool aint cheap
More
12 Jun 2006 15:26 #54004 by lemo32
Replied by lemo32 on topic stator pulling gone horribly awry
welcome to kawasaki, i dont feel alone any more, i would break then fix. it's good ol murphys law, i feel your pain.

1979 kz 1000 06 katana 750

Please Log in or Create an account to join the conversation.

  • wireman
  • Visitor
12 Jun 2006 16:36 #54023 by wireman
Replied by wireman on topic stator pulling gone horribly awry
if its the same as ltd stator i might have an extra.

Please Log in or Create an account to join the conversation.

More
22 Jun 2006 06:26 #56202 by cary
Replied by cary on topic stator pulling gone horribly awry
ok... got a new rotor and starter clutch... I'll be out of the country for a couple weeks for work, but when I'm back we'll be trying to extract that old rotor and get the beast back on the road

Please Log in or Create an account to join the conversation.

More
22 Jun 2006 08:28 #56234 by trippivot
Replied by trippivot on topic stator pulling gone horribly awry
removing a rotor is an art. especially if the bike has been overheated at one time in it's life.
a bolt works fine, but it's how you do it
use metal anti seize gook on the threads
SHOCK will divide the metals on the taper friction fit
if you use a "air" impact driver dont wash out the threads. tension it up pretty good and smack the bolt with a 48oz ball peen hammer or the like but not a framing hammer they bounce . take the tension off re grease the threads and repeat.
its the shock that does the trick, not the pulling pressure of the threads.

Please Log in or Create an account to join the conversation.

More
22 Jun 2006 08:39 #56242 by trippivot
Replied by trippivot on topic stator pulling gone horribly awry
the 2 for KZ's
16x1.5 3 inches or
18x1.5 3 inch long also

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.