Brake light indicator

Once again, as I tie into my new old KZ650, I'm discovering things that I have not the knowledge for.

Upon replacing all the bulbs under the indicators, I noticed that the brake light never comes on; neither with the front or rear brake initiated.

When looking at things further, I noticed that there's no wires going to either the front or rear brake. Where does the brake indicator tie into the electrical system to pop the light on? I figure my problem is going to lie somethere around there.

The rear brake pedal should have a light weight spring attached that actuates a switch mounted on the frame. Front brake should have a switch mounted in the brake lever, or sometimes in a hose splitter block up on the trees, I'm not familiar with 650's...

I posted this last year. I havent solved the rpoblem yet, other than to make sure I use the back brake

kzrider.com/forum/viewthread.php?tid=28878

kc5deb
Please update your profile, you should have a signature that lists your location and bike model, year, etc

Nevco48 is right about the switch locations.