KZR's Bikes of the Month for 2024

solder joint in oil

More
27 May 2006 14:41 #50483 by azchili
solder joint in oil was created by azchili
i'm in the process of rewing my stator because of a broken wire inside the housing.i saw a post were the wires were completely replaced and i cant find it.question?how does the solder joints hold up to oil especially if there drownd in it all the time.has anyone done this and can any wire be used(i want to make a new harness)

Please Log in or Create an account to join the conversation.

More
27 May 2006 15:41 #50487 by btchalice
Replied by btchalice on topic solder joint in oil
it shouldnt be a problem if it doesnt touch the cases. if your worried about it you could coat it with liquid electrical tape from wally world
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.

Please Log in or Create an account to join the conversation.

  • Duck
  • Offline
  • User
  • e vica na i sau na ga
More
27 May 2006 15:46 #50489 by Duck
Replied by Duck on topic solder joint in oil
Solder is unaffected by oil.
100

XXXXXKawPen:the other green meat

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.