KZR's Bikes of the Month for 2024

Hi friends

More
17 May 2006 19:07 #48114 by Z1Bama
Hi friends was created by Z1Bama
Im installing 3 ohm ACCEL coils/8.5 mm plug wires along with dyna s's in the points box on my 1974 Z1 900. The old dyna 3 ohm coils came off and were bolted thru the holes in the bars running thru the coils. was this considered a grounded mount? The ACCELs are a little longer so the bars the dynas were bolted to are coming off and will use mounting bars that came with the new ACCEL kit. Anyway was it correct to bolt these kinda coils thru the holes on each end this way? Thanks for your comments

Please Log in or Create an account to join the conversation.

More
18 May 2006 00:35 #48178 by Lorcan
Replied by Lorcan on topic Hi friends
Yes that's the correct way to mount them.

760cc - 8.69@162mph
810cc, 211mph www.750turbo.com
www.stormdragbike.com

Please Log in or Create an account to join the conversation.

More
18 May 2006 09:14 #48234 by loudhvx
Replied by loudhvx on topic Hi friends
Electrically, the core of the coil doesn't need to be grounded.

Please Log in or Create an account to join the conversation.

More
21 May 2006 22:04 #49018 by Z1Bama
Replied by Z1Bama on topic Hi friends
Thanks guys.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.