brake light on?

ok, i got rid of my fender. cleaned up the rear area. welded a brakect on an installed new lamp. the lamp works properly. the running light, the brake light all works. know i have a brake warning light up on the dash panel. why? and what did i do wrong? :blink:

when the batteries in the camera charge up i will show some pictures of what i did.

thanks

here is what i did. took about a hour to do.

Post edited by: timber, at: 2006/04/15 20:19

pix from the rear

when you reassembled the tail end you must have pinched a ground wire. i believe thats what turns the warning light on.

thanks arobsum, i went out and checked everything. i ended up reversing the power and the ground wires. once i knew what the warning light meant i was able to track it down easy enough and make the corrections needed.

hey timber, i recognise that light!!!!! that is the same one that i used to do my rear fender eliminator!!!!

they fit perfect don't they!!! ha ha gotta love truck/trailer parts!!!!!

is yours led? that is what i used. not sire if you remember that.