KZR's Bikes of the Month for 2024

Letter to Newtronic, timing, stammering, and COIL

More
07 Apr 2006 19:48 #37720 by loudhvx
Intermittent coil problems are one of the hardest to troubleshoot without using the "replace it to test it" method, which can get expensive. Glad you got it solved!

Please Log in or Create an account to join the conversation.

  • Biquetoast
  • Topic Author
  • Offline
  • User
  • King Jeremy The Wicked
More
08 Apr 2006 05:26 #37776 by Biquetoast
Replied by Biquetoast on topic My letter to Newtronic support - your thoughts?
loudhvx wrote:

Intermittent coil problems are one of the hardest to troubleshoot without using the "replace it to test it" method, which can get expensive. Glad you got it solved!


You ain't kidding!

And remember, I'm still really a newbie in a lot of ways - never really turned a wrench until I got my 400 3 years ago, so I'm still not that good at spotting the obvious sometimes.

...but what truly made the light go off (pun intended) in my head was: When I was setting the timing for the millionth time with the timing light, I suddenly realized that the light wasn't blinking perfectly steady. It seemed to miss one or two every once in a while, then it would miss every other one for a series of maybe ten or so. I tried the timing sensor on both plug wires and the result was the same (again, only when the coil warmed up a bit). Mind you, since the ignition was Newtronic, and the wires had been replaced, it really couldn't be anything else. I was so pissed at myself for never really *seeing* that before, even though I've probably seen it a hundred times.

Again, thanks to all you guys for all the advice and time spent on this problem.

EDIT: I think I'll rename this thread so it better reflects the outcome...

Post edited by: biquetoast, at: 2006/04/08 08:31

(1.) '75/'76 KZ400D - Commuter
(2.) '78 KZ750B3 Twin - Commuter
(3.) '78 KZ750B3 Twin - Commuter
(4.) '75 KZ400D - Sold
kz750twins.com

Please Log in or Create an account to join the conversation.

More
08 Apr 2006 07:17 #37805 by loudhvx
Yes, the strobe timing light is good for a lot of things other than setting timing. It also exposes false triggers in an electronic ignition system. A false trigger will produce a "ghost image" of your rotor in the wrong position.

Post edited by: loudhvx, at: 2006/04/08 10:19

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.