KZR's Bikes of the Month for 2024

KZ200 Float Specs

More
19 Sep 2006 13:16 #77895 by CTRider
KZ200 Float Specs was created by CTRider
Hi! Someone on another forum recommended I stop over here to pose this question.

I have a KZ200 that has been stalling while riding, and the problem seems to be that the float levels need adjustment. Anyone have the specs for where they should be at?

Please Log in or Create an account to join the conversation.

More
22 Sep 2006 08:40 #78726 by wiredgeorge
Replied by wiredgeorge on topic KZ200 Float Specs
It would help to know the generic carb type but in general, using the service fuel level method, normally ~ 3-5mm below the gasket mating line is right in the ballpark for most Keihin and Mikuni carb types.
wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

More
23 Sep 2006 11:08 #78955 by CTRider
Replied by CTRider on topic KZ200 Float Specs
Thanks for the info.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.