Sourch for throttle shaft seals for VM 26SS carbs

Hi Folks,
I'm rebuilding the carbs on my KZ900 and I need to replace the throttle shaft seals. Need two blank end covers and six shaft seals. Z1 Enterprises doesn't list them on  their website.
Do you know of any other sources?
thanks
Bill

Not cheap...

https://www .ebay.com/itm/ 375429595125 (remove spaces)

Z-Fever

z-fever.de/shop/en/?cat=c710_VERGASER-VERGASER-710.html
z-fever.de/shop/en/product_info.php?info...3_grommet-carbs.html
z-fever.de/shop/en/product_info.php?info...3_grommet-carbs.html

 
 

This looks to be the same set from the same supplier as Nessism mentioned, but they are 2/3 the price.

www.siriusconinc.com/m/products-detail.php?product_id=123335

DOHC wrote:

This looks to be the same set from the same supplier as Nessism mentioned, but they are 2/3 the price.

www.siriusconinc.com/m/products-detail.php?product_id=123335

The price is really cheap !!!.

DOHC wrote:

This looks to be the same set from the same supplier as Nessism mentioned, but they are 2/3 the price.

www.siriusconinc.com/m/products-detail.php?product_id=123335

Good find!

I buy a lot of stuff from Sirius.  They have good prices on Keyster parts.  I buy their cheapest VM kit, for the float valve, gaskets, and pilot jets.  I've also bought stand alone float valves, pilot fuel screws, and Keihin viton tip float valve needles.  They are in Canada, and ship fast, but shipping isn't cheap.  It's worth it, though.  Before buying, it's good to check the shipped price from both their eBay site, and direct.  Sometimes one is cheaper than the other, and other times the opposite.  

There’s not enough pieces in the Sirius kit. You need two caps.