KZR's Bikes of the Month for 2024

97’ police choke shaft

More
17 May 2023 07:04 #884794 by Aragone79
97’ police choke shaft was created by Aragone79
I picked up a 1997 project police bike and the carbs do not have a choke shaft or any of the parts for the choke.  I found the part number for the shaft but I’m wondering if it comes with the pieces that actually connect the shaft to the choke plungers and if not does anybody know the part numbers for that?  Thank you! 

Please Log in or Create an account to join the conversation.

More
17 May 2023 18:41 #884821 by TexasKZ
Replied by TexasKZ on topic 97’ police choke shaft

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24

Please Log in or Create an account to join the conversation.

More
17 May 2023 18:51 - 17 May 2023 19:53 #884822 by Nessism
Replied by Nessism on topic 97’ police choke shaft
Those sorts of parts are hard to come by.  You may have to buy a set of parts carbs to get what you need...and even junk sets cost a lot of money these days.

Edit: you need these, among other things.  The forum software has problems with eBay links, so remove the spaces...

https:    //www.ebay.com/itm/125936975424

The little 1/8" balls, you can get anywhere.  You will need the little springs, though.  
Last edit: 17 May 2023 19:53 by Nessism.

Please Log in or Create an account to join the conversation.

More
17 May 2023 19:52 #884823 by Aragone79
Replied by Aragone79 on topic 97’ police choke shaft
Thank you for the link!  I have been contemplating another set of carbs mainly because it’ll probably end up costing about the same.  But like you said, they are pricey! 

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.