KZR's Bikes of the Month for 2024

Float height cv34

More
22 Jun 2022 08:53 #869210 by Maxbou92
Float height cv34 was created by Maxbou92
Hello whats the set of the keihin float cv34mm are supposed to be?! I want the measure from the carb and the top of the float .. not the gas tube method of it’s possible. 
thank you so much 
maxime

Kz750e 1980

Please Log in or Create an account to join the conversation.

More
22 Jun 2022 16:44 #869225 by Nessism
Replied by Nessism on topic Float height cv34
The gas measurement method is the only proper way.  And unless your float needles are in very good shape, I recommend changing them for new.  Either OEM (expensive) or Keyster (the best of the aftermarket needle makers.)

Please Log in or Create an account to join the conversation.

More
22 Jun 2022 18:14 #869229 by Maxbou92
Replied by Maxbou92 on topic Float height cv34
Can you explain me how to do that?!  Fill up the carburetor and open the drain valve.. I understand that, but do I need to write a measure on the tube for be sure the gas don’t exceed the mark?! Or the gravity do his job and I only need to check the 4mm behind the bowl ?! Thank you again

Kz750e 1980

Please Log in or Create an account to join the conversation.

More
22 Jun 2022 20:08 #869231 by TexasKZ
Replied by TexasKZ on topic Float height cv34
The procedure is well described in the factory service manual. 

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.